Answers.com > Wiki Answers > Categories > Cars & Vehicles > American Cars > Chrysler > Chrysler Fifth Avenue > 1988 Chrysler 5th Ave with Lean Burn System dual-coil or single in the distributor you have seen conflicting information?

1988 Chrysler 5th Ave with Lean Burn System dual-coil or single in the distributor you have seen conflicting information?

In: Chrysler Fifth Avenue [Edit categories]

Answer:

Replace the ignition with a MOPAR electronic ignition kit #p3690426. You will never deal with lean burn again. It costs about $200 and bypasses the LBS.

ANSWER

I'm not sure what the question is. Do you need to identify whether you have the single or dual coil pick-ups? You will have 2 sets of wires coming from under the distributor if you have a dual; and one set if you have single.

Contributor:

Eyknough

First answer by Mrherman. Last edit by Eyknough. Contributor trust: 32 [recommend contributor ]. Question popularity: 12 [recommend question].

[report abuse]

Can you answer these Chrysler Fifth Avenue questions?

How do you install a electric fuel control system?

Answer it!

Relevant answers:

Where can you find vacuum harness for 1988 Chrysler 5th ave?
its under the crank shaft right by the underlay belt. remove the distributer cap and make sure your drive train is straight. once you've done that just loosen the 4 bolts from the alternator and...
What causes no spark from distributor in 1985 Chrysler 5th ave?
COIL
Why won't blinker work on 1988 Chrysler 5th Ave?
probably needs a new flasher (round aluminum or plastic....its in the fuse box, there is one for turn signals and one for emergency flashers) swap the 2 to test....this is a common issue with 5th aves
What is the weight of a 1987 Chrysler 5th ave?
3600 lbs
Where is the control module in an 1988 5TH ave?
Taking a guess, Your 1988 5th Ave has a 318ci motor with Lean-Burn Engine control. Chrysler put the control module in the rectangle box attached to the side of the air cleaner. All of the engine...