They are SAE
No. A 1991 Plymouth Acclaim does not have an interference engine.
on alternator
Plymouth does not use inertia/reset switches
No it was had an AA body code.
no what dose acclaim mean not gas and stuff
4.5 quarts
My 1991 Plymouth Acclaim manual says mine is R12, but I can't say for the '92 It was built with R12, should be retrofitted to R134a.
Check the bulbs to see if they are shot. If that does not resolve the problem check the fuse. If that does not resolve the problem take it to a mechanical and have it checked for wiring problems.
10 amp... in socket # 20
Until you run out of gas...
The lever you move to activate the turn signals is the multifunction switch.
Transmission fluid is added into the same spot that the dipstick is in.