Answer
you must remove the cd and tape deck starting with the plastic pop off round things at bottom rear of arm rest then work your way up under the seat warmer buttons are 2 more screws to undo . then you pry the black square from around the cd and tape deck the face plates will pop off they can be put on after . then undo all the hidden screws and take out the cd player and leather thing around it. on the top of the cd player under a cover is a 5 amp fuse it is blown re-solder a new one and re assemble, it will then work just did this to my 929 make sure the metal prongs from the face plate dont bend while re assembling with a proper tool the cdtapedeck will just slide out but good luck if you dont have on the unit clicks in . make sure to reassemble all parts in order because once the cd player clicks back in ,it aint commin back out unless you start all over.
First answer by ID1192353011. Last edit by ID1192353011. Question popularity: 21 [recommend question]
