http://autorepair.about.com/library/illustrations/bl100a-lib.htm
Here is a complete diagram to where it is....very nicely illustrated on this one...M0rningangel1@aol.com
Do you have a picture of location of crankshaft position sensor for 1992 Chevy Cavalier 2.2L ohv engine?
Crankshaft position sensor circuit malfunction.
The 2004 Chevy Malibu crankshaft position sensor location is dependent upon the type of engine. In most cases the crankshaft position sensor is on the back of the engine.
The location of the crankshaft position sensor depends on which engine the car has. If it is the 2.5L 4 cylinder engine the crankshaft position sensor is behind the ignition module. If it is the 2.8L V6 engine the crankshaft position sensor is on the side of the engine nearest the firewall and just above the pan rail in about the center of the block.
The crankshaft position sensor is located on the rear of the engine. It is mounted just above the oil pan on the engine block.
where is the cranksensor on 1994 chevy pickup with a 6.5 engine
The crankshaft position sensor is located behind the starter on the front of the engine. Hope this helps! Mitch art_y2k1@yahoo.com
Its on the firewall side of engine between transmission and engine just below the ignition coil packs one of the wire connectors from ignition module go to crankshaft position sensor
This sensor provides a signal to an engine management computer or an ignition control module or igniter indicating the position of the crankshaft.
You will find the crankshaft position sensor on the passengers side of the engine block, close to the starter.
AnswerThe crankshaft position sensor should be located on a small metal bracket very close to the harmonic balancer which is attached to the end of the crankshaft. If you are having trouble locating the harmonic balancer, it is the lowest pulley on the passenger side of the engine, in the centerline of the engine.
The crank sensor target is on the crankshaft inside the engine on a 5.7L Hemi.