It is a defective stepper motor in the cluster, you can find people who rebuild them on eBay fairly cheap. Another option is to buy the stepper motors online and solder them in yourself, if you can solder.
WD40
caliper sticking
take it to the vet
Flapper in tank sticking or not seating properly. Needs replaced.
Clean up your door switch and use WD-40. Sometimes it will stick and keeps the light on.
That's Farina, it keeps the muffin from sticking to the pan while baking
nothing, it keeps our oxygen in. and keeps the bad meteorites out sometimes.
sounds like your throttle body is sticking try cleaning it! should help out a bit
the grease in the pizza helps so that it doesn't stick to the box
her babies are probably moving around in her belly, thus, making her uncomfortable
No you can not , That is what makes and keeps the engine running
If it is the same problem that appeared on my '04, it is going to be the instrument cluster. The speedometer is part of it and couldn't be changed independently. Mine started bouncing some when I would first start it up, then start working normal. I ignored that for a while. Then it got to where it would not move at all till I had driven some , then it would start working right. It finally got where it wouldn't move at all or just peg out. I had the cluster changed and that fixed it.