This will only work if you have a trip odometer: 1. Put the key in the ignition, but leave the switch turned off. 2. Push your trip odometer reset button in and hold it in. (Important: do not release the trip reset button or you will have to begin the process over.) 3. Turn key to last position before engine tries to start, but do not start engine. (your dummy lights and dash lights will come on) 4. Continue holding reset button pushed in. 5. You will see five dashes (-) in place of the numbers for your odometer read out. They will flash and then there will only be four. Each time they flash off and back on, there will be one less until they all disappear and then you will see zeroes all the way across. 6. Once you see the zeroes all the way across, you know it is reset. You may now release the trip reset button. 7. If you accidently release the trip reset button before the process is complete, just start over and make sure to hold the button in until the process is complete.
How do i reset a service engine light on a 2005 gmc c6500 cat engine
Bring to a shop that has an ABS scanner
i dont know how
turn off the ignition. hold in the odometer reset button and turn on the ignition to on (Not start). Keep holding the button in for about 8 seconds and the millage will come back on. Light should be out.
Usually your oil needs changing. You have to reset the light yourself. Look in manual it will show how to reset it.
Two reset the maintenance required light on a 2005 Honda Accord all you have to do is hold the odometer reset button on the gage panel for about 30 seconds while the key is in the on position. Not running just in the on position. it will reset.
Press and hold the odometer reset button while at the same time turning the ignition switch to on. Do not start the engine. After around 5 seconds the maintenance required light will go out.
With the ignition switch in the off position, hold in the hold in the trip odometer. Now turn on your key and you will see a series of zeros begin to appear. Once that stops, your maintenance light will be reset.
When changing the wiring of any part of a car, a diagram will help make sure the wires are placed correctly. The wiring diagram to the taillights of a 2005 Toyota Tacoma can be found in its maintenance manual.
Press and hold the odometer reset button while turing the ignition switch on without starting the engine. After 5 seconds the light will go out.
With the ignition key off, push and hold the odometer reset button. Now turn the ignition to the on position but do not start the engine. After about 5 seconds the Maintenance Required light will reset.
same as a 2005 odometer OS on turn key off hold reset turn key on loght flashes then turn off