turn into a solid
Condensate; evaporate
the glass is malleable
describe how heating can change the water
Inform their teacher and then throw the beaker in the broken glass
fountain+glass=water in glass
Because the heat supplied to thermocol is absorbed by the water inside thermocol and this continues till the temperature reach the boiling point of water. Once the temperature reaches to boiling point of water then the temperature of water inside the thermocol is same as the temperature on the outer side of thermocol facing the heat and then only the thermocol glass will start burning.
the glass is malleable
The heating curve of water and the heating curve of glass are similar in that they both illustrate the relationship between the temperature of the substance and the amount of energy added to it as it is heated. However, there are some key differences between the two curves. One major difference is that water has a much higher specific heat capacity than glass. This means that water requires more energy to raise its temperature by a certain amount than glass does. As a result, the heating curve for water will be flatter than the heating curve for glass, indicating that it takes more energy to raise the temperature of water. Another difference is that water has a phase change (melting and boiling) at certain temperature ranges, whereas glass does not. So, the heating curve of water will have a steep increase in temperature at the freezing point and the boiling point, indicating the energy absorbed during the phase changes. Additionally, the thermal expansion coefficient of water is much higher than that of glass, meaning that water expands much more than glass when heated, which also affects the heating curve. In summary, the heating curve of water is flatter and has more steep increases due to phase changes and thermal expansion, while the heating curve of glass is steeper and does not have phase changes. John Carlo Coronado
If you have no hot water, your heating element is out most likely
The hot water will increase the temperature of the glass and cause the inside of the gas to expand faster than the outside.This will exert a force on the glass and the glass may crack.
If both of them consist of water and ice at the same time then the temperature for both of them is zero Celsius (from the heating curve of water)
Ground salt is soluble in water, glass is not. Put the mixture in a strainer and run water over it for an extended period. Water. The salt dissolves, the glass doesn't.
You can manage the boiling point by managing your heating element.
Beginning at 4 degrees C, water expands when it is heated. It doesn't matter what kind of container it's in.
By collecting some sea water, pouring into a wide metal or glass tray and heating it until the water evaporates
Assuming the container is filled to the top with minimal airspace, the water will freeze becoming ice. It will continue to get colder and start expanding until it fills the glass bottle and then force the glass to break as it continues to expand.
describe how heating can change the water
Type your answer here... Simplest answer is your engine could be over heating. There are other possible problems but this is the most likely