Privileged mode (will turn into a # sign after the router name instead of the > sign it has upon startup.
This command enables a strong encryption algorithm for the enable secret password command.
This command provides the ability to the administrator to enter an encrypted form of the enable password. If the administrator uses the enable password command the password is stored in plain text within the startup config file. If enable secret is used, the password is stored as an encrypted string within the startup config file.
It is the privilege mode.
Refer to the exhibit. A network administrator successfully pings R1 from R3. Next, the administrator runs the show cdp neighbors command on R3. The output of this command is displayed.What are two reasons for the absence of R1 in the output? (Choose two.)~**The no cdp run command has been run at R1.**The no cdp enable command has been run at Fa0/1 interface of R3.R1 is powered off.
enable
A layer 2 switch may need an IP address if the operator wishes to be able to access it without a serial cable. With an IP address, the switch can be access from anywhere with a connection to the network or an Internet connection.
privileged executive mode
It is the privilege mode.
Switch(config)# ip default-gateway 192.168.1.254Switch(config)# interface vlan 1Switch(config-if)# ip address 192.168.1.1 255.255.255.0Switch(config-if)# interface fa0/1Switch(config-if)# switchport access vlan 1
There is no need to enable the administrator account as it is always enable (bundled in the operating system). Hence, a user may be given limited access rights by the person accountable to keep the administrator account.
Ask the network administrator to enable the RuneScape site. If there is a policy not to play games from within your network (your school or your work, for example), take it as a hint: in this case, you are not supposed to play games.
Enable logging for configuration files, change passwords, check for Trojans and other "guests".