NO. The rotors will rust overnight if the conditions are right. The rust will be removed the first time the brakes are applied. Yes if the rust has pitted them. Just have them turned on a brake lathe.
No as long as the plunger moves freely. The rotors can look rusty have a few days of sitting in damp environment.
have your brake rotors turned on a lathe, or replace them with new ones.
Tap on your 1998 Mazda brake rotors with a hammer or mallet until they become loose. The brake rotors will simply slide off.
Either warped rotors or drums can cause pulsating. Apply the parking brake slowly while going about 15mph and see if t pulsates. If it does, it is the drums that need turning. If not, it is the rotors that need turning.
Brake rotors wear just as brake pads do and when they wear down beyond minimum specs they become unsafe. Good brakes are a # 1 priority.
You probably have rusty/scored brake rotors.
No as long as the plunger moves freely. The rotors can look rusty have a few days of sitting in damp environment.
Bad rotors
No just the bad one.
You either have a bad brake caliper or the brake hose is bad.
could be bad rotors, or brake pads wearing unevenly, which would result in bad rotors.
have your brake rotors turned on a lathe, or replace them with new ones.
bad brake rotors or alignment shocks struts
It depends the level of rust and degradation but yes usually minor rust is available to fix with a liquid which decreases rust and the things associated.
Yes they can. Depending on how bad the rust is, the rust will act as an abrasive and wear the brake pad some what quicker to much quicker. You'll never no ahead of time, so you can give it a try, but if the rust hasn't come off after about 50 stops, it's probably have shortening effect on you pads life. -Brake Engineer
Brake calipers are the hydraulic devices that wrap around the rotors and pinch the brake pads into the rotors when you stop.
A pulsation when braking, and a loud screeching noise(pads also gone).