If you have something other than a TV with a standard cathode ray picture tube, skip to near the end and the part about calling a repair shop. Plasma and LCD sets usually don't fail like that. Yes, they can fail electronically like any of the older TVs, but it takes a tech to sort it out. It isn't like changing an alternator in a truck. If your TV has a blue and green picture (with red missing), the red gun in the picture tube (CRT) has a problem. It could be in the CRT itself, or it could be in the support circuitry (the red drive). Though it is possible that the CRT has a problem (and the picture tube isn't really "repairable" like a fault on the board may be), the problem is more likely in the red drive itself. Any way you cut it, if may be a touch expensive to fix it. Call a shop or two and ask about their estimate policy. (Have your set's model and serial number handy, and a chassis number if it is on the manufacturer's label on the set. Do your homework before you call.) Describe your problem and see what carry in or home service costs. The shops take calls like this all the time. It's their job, and they welcome the calls. You have lost your red gun (because the CRT failed or the red drive failed). See what they say. There is probably little to nothing you can do to fix it yourself. Repairing a drive circuit in a television isn't like rewiring a lamp. Smaller shops may work a deal with you if you ask. Do you have anything to trade for the service or to couple with cash for a repair? These can be heartbreakers at times. Good luck sorting this one out.
I'm guessing you're trying to put red-green-blue components into a red-blue-yellow TV. Try an HDMI cable.
Red, Blue and Green rca cables are a component video cable. Each cable carries the information that comprises the red, blue and green color information for the picture. The green cable also carries the sync or refresh information for the picture. This cable can carry video with resolutions from 420i (standard analog TV) to 1080i (currently the highest definition broadcast in North America on digital TV).
EVERYBODY KNOWS THE ANSWER TO THAT, SILLY. The answer is quite simple, you see. Follow these steps, ONE, TWO, THREE. One: The red color mixes with the green color. Two:The green color mixes with the blue color. Three: You have color tv! And a little tip, Don't get close enough to the tv where you can actually see the red, blue, & green. What are you, blind?? HOPE I ANSWERED YOUR QUESTION!
Red, Green and Blue.
Red, blue, and green.
Why is the light on power no picture tv
The third primary colour of light besides red and blue is green. This is why colour televisions contain red, blue and green pixels.
There two different colours HA HA No, the difference is that a green screen is more commonly heard of! But in ICT it is the exact same Both are differ in colors You can get details about Green screen backdrop and Blue Screen backdrop from here http://www.photostudiosupplies.com/photography-backdrops.php
Have you tried adjusting the settings on your tv like the contrast/tint/etc.? It might be a bad picture tube in which case you may need to get a new tv but without more details it's hard to know for sure what's going on.
All colours in a TV screen are made by combining the red, green and blue identified in the original scene.and recreating those light levels on the TV screen with various phosphors. SO the answer id the same for any colour you ask about - red, green and blue at various levels
boobs
Televisions, and nearly all other computer screens use red, blue and green because they are the three colours light is made of. This is different to what colour you get by mixing paint. Colours are created by which different parts of the light spectrum an object reflects. Mixing paint which reflects blue with paint which reflects yellow will create a combination which reflects green. In the light spectrum: Blue + Green = Aqua (Light blue) Green + Red = Yellow Red + Blue = Magenta (Pink)