0
Brake lights taillights turn signals dash lights dont work but head lights do on a 1997 Chevy S10 Blazer?
Wiki User
∙ 14y ago
Replace your Head light switch. All of these circuits run through that switch.
i just had this same problem but on my '97 Chevy Malibu... if you've just installed an aftermarket stereo then this might be the solution for you: On most aftermarket stereos there's no wire connection for the Dimmer and/or Illumination (or there's a hook up for either the Illumination or Dimmer wire) and usually most people just tape them off and push them back. Well in the Chevrolet Malibu all of the Instrument Panel (to include the factory stereo) are wired together so that if one wire is disconnected it all goes out... so in order for you to get your Instrument Panel lights working again you must splice the two wires together...
In lamens terms.. you have to connect the Dimmer wire [Brown (not striped)] and the Illumination wire [Grey (not striped)] together.. if your problem was the same as mine then this should do the trick
Good Luck!!!
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Why did my headlights taillights and dash lights stopped working when flashers brake and turn signals work fine what happened?
in dash lights
What do I check when the brake lights and turn signals don't work on a 95 silverado?
the circuit boards on the taillights are bad.
Why won't the tail lights go off when I park and turn off the headlights?
Is it the taillights or the brake lights? If taillights it may be a wiring problem, If brake lights check the switch on the brake pedal
On a 1990 olds 98 the problem is no brake lights or taillights i do have headlights and turn signals thanks?
If you have no brake lights or tail lights then you've probably got an electrical problem. Check the fuses first and see if you have one or more blown.
What would cause your turn signals and brake likes to not work on your 1996 blazer?
It is your multifunction switch that has gone out. It is located in the steering column. I used my emergency lights and it blew out brake lights, turn signals, and emergency lights. In newer models Chevy did a recall not so for our older models. Mine is a 1995.
What would cause your brake lights to not come on with the headlights on If the headlights are off the brake lights are fine?
Possible ground issue at the taillights.
What would make the brake lights and turn signals not work on a 95 Grand am?
Check the bulbs they are double filamented with the smaller for stop and turn signals
Taillights not working on 1993 dodge Dakota but brake lights and turn signals do work what's the problem?
The bulbs should be checked on a 1993 Dodge Dakota if the taillights are not working. The plugs on the trailer package should also be checked to make sure that they are working.
Why does your left LED brake light not work at all and your right LED brake light work when taillights are on?
you need to repair the lights and they will both work and your taillights will work properly
If none of the taillights on a 1999 Ford Ranger are working including turn signals and brake lights what can you check yourself?
Try checking the fuses. try checking the plug on the harnes at the back of pickup on frame.
My brake lights or turn signals don't work on my Cadillac deville?
How do you replace brake lights
What fuse controls the back lights on 1994 Jeep Grand Cherokee?
It should say TAIL for taillights or maybe brake lights.
