Bypass heater core?

on the fire wall on the passenger side there will be 2 hoses same size right beside eachother. dissconect each of the hoses and then connect them together with a smaller diameter hose between the two...

Remove the hoses from the heater core pipes and install a short piece of pipe in both those ends. Install hose clamps and it's bypassed.

There are hoses in the engine compartment that go to the heater core. You can remove the intake and out going hoses from the heater core. You have to either block off these hoses or connect them...

Let the car cool down. Put a drain pan under the car. Drain about a gallon of coolant from the petcock at the bottom of the radiator. Locate and loosen the hose clamps on the feed lines going to the...

Follow the heater hoses to the firewall. There should be 2. disconect them from the heater core, then insert a 5/8 hose bib and clamp them together.