0
Yes
Wiki User
∙ 6y ago
Add your answer:
Earn +20 pts
What is the min-max kva for an IBM 5094 and an IBM 5294?
min: 0.5 KVA MAX: 1.5 KVA
Kva demand execess charges from msedcl for indistrial category?
Yes, the KVA can demand for excess charges from msedcl for the industrial category.
How do you reduce kva demand?
If you are being billed for kVA or a percentage of kVA as opposed to kW then installing power factor correction equipment will reduce the kVA demand. To determine if this is cost effective is the challenge which I specialize in. Email me at mark@epowerfactor.com
What is the cable size for a 1500 kVA generator with cable length of 50 meters?
35 KVA generator using for load 100 meter length which cable need to used
Why maximum demand rating is not expressed in kw?
maximum demand is measured in kva because current drawn is dependent on power factor for the same load and current drawn is calculated with kva
What will happen if we exceed sanctioned maximum demand of msedcl large scale industry?
Rs. 285 per kva
What is the max load of 500 kva DG?
I=Kva*1000/v*1.732 =500*1000/415*1.732 =500,000/718.78 =695.62 Amps. So max.load of 500kva DG is 695.62 Amps
Working principle of trivector meter?
trivector meters are used to measure kVAh and also kVA of maximum demand.it has a kwh meter and reactive kvah meter in a case with special summator mounted between them.
Difference between two part tariff and three part tariff?
1.two part tariff= maximum demand+energy consumption (150 kva + any greater than 150 kva consumption) 2.three part tariff=maximum demand+energy consumption+ any energy charge (150 kva + any greater than 150 kva consumption + out source any energy charge ) unlimited usage of tariff is nothing but three part tariff
What are the 4 typical metering requirements for a small industrial electrical installation?
maximum demand, energy, kva rating, and power factor
What is the stack height of 1250 kva diesel generator set?
what should be height of stack of 1250 kva D.G as per Indian pollution boardA: it should be 7.1 meter + building height of 1250kva Dg set installed.
What is the max length of cantilever beam?
1.50 meter from the support is the max. safe length cantilever beam
