![]() |
Can you change the front strut springs on a 1995 Hyundai Accent if you have a parts car to swap pieces?In: Hyundai Accent |
[Edit] |
Answer
Hi, Just finished the front strut work on my 1998 Hyundai Accent Hatchback. Step 1: Take off the tire. Step 2: Unscrew the Caliper bolt near the bottom of the caliper (Make sure you get a block for the caliper to rest on) Step 3: Unscrew the 2 Strut Bolts holding the strut in place (Before you do that, take a screwdriver and mark where the strut was sitting for when you bolt it back on) Step 4: Unscrew the upper strut nuts (3 of them and they are under the Bonnet) Step 5:Take the strut assembly out. Step 6: Use a spring compressor to compress the spring until there is no force on the upper strut mount. Step 7: Unscrew the nut holding the upper strut mount in place with your Impact and take the mount off. Step 8: Take tension off of the old spring and put a new one on using the same technique. Other than that, you reverse these steps and your done!!
First answer by ID2393048450. Last edit by ID2393048450. Question popularity: 65 [recommend question]
|
Research your answer: |
- Your hyundai accent 2001 chugging have put new spark plugs in the leads test ok cylinder 3 not fireing could it be fuel injector?
- Password on fun brain to get past brain break mathn arcade?
- How do you remove the dash board in a 1995 hyundai accent?
- Need diagram of underside of car to determine where is the oil pan located for a 2001 hyundai accent?





