You cannot add an external reverb to a surround sound (Dolby Digital or DTS) signal connected through the digital input, such as a DVD player. Many receivers can add reverb and ambient echo to the sound themselves to emulate different venues. If you want reverb for your voice for Karaoke, you can do this inside the DVD player or by adding an external reverb processor that adds effects to the microphone cable signal.
Connect your PS3 to your TV then connect you surround sound to your TV.
Delay Designer 5.1 (digital delay) and Space Designer 5.1 (reverb) are the two surround effects for surround mixes. They can only be used on surround channels.
A DVD player does not have surround sound built into it. You can purchase surround sound speakers and connect them to the DVD player. This will make your movie experience much better.
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
Connect the digital audio output from the TV to the digital input of the surround sound receiver.
You can use any sound card that has surround sound outputs along with a surround speaker setup to watch movies in surround sound. No sound card replicates all the functions of an actual receiver, though, as a real receiver will connect your CD player, TV, DVD player and other devices and offer a AM/FM tuner for radio (that's the 'receiver' part of the description).
Audio out or headset out from the laptop to audio IN on the surround unit. The audio level on the laptop might need to be set at MAX to get enough volume for the surround to use properly. To hear a full surround sound signal you will need to have content that is stored in a surround sound format and a sound card that supports multi-channel audio outputs.
Connect the audio out of the TV to the audio input of the surround receiver with a dual RCA cable. Note that this connection isn't surround. You will need to connect a DVD, Blu-Ray or digital cable box to the surround receiver for true surround sound.
Yes but you will need HDMI cables.
If your surround receiver has HDMI, connect an HDMI cable from the NeoTV to the receiver, and then HDMI out the receiver to the TV. If you don't have HDMI on your receiver, you can connect an optical cable from the NEOTV to the surround receiver.
The word you want is reverb.
Connect the sound system to the AUDIO OUTPUT connectors on the back of your TV. If theses connectors are not there you will need to get a new TV with these connectors or if there is a cable or Satt. box, connect the surround to these.