0
Can you connect your component cable with your t.v which has a composite input?
Wiki User
∙ 14y ago
and my composite cable is a phono cable n the cable is for my ps3
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Can cable boxes be connected to home theater projectors?
Yes. You can connect them with composite, component or HDMI cables. For the best results, use the HDMI cable, if your projector has that type of input.
How do you hook up a Wii to a HDTV?
Using the composite cables (yellow, white, red) that are provided with the Wii. You also have the ability to purchase a component cable (red, green blue & red white) and connect them to the TV accordingly. Some newer HDTV's may not have a composite input so you may need the component cable. Some may also have the green component input double as the yellow composite input. I have seen this primarily on Samsung TV's.
How do I connect a Bose 3-2-1 to HD TV and Cable?
The Bose 321 system does not support Hi-Def inputs, so the best idea is to use it just for sound. Connect the digital audio output of the Cable box to the optical input of the 321. Connect an HDMI cable from the Cable box to the TV directly.
Can you connect a high definition television to a digital cable box with a high definition multimedia interface cable and a digital video recorder video cassette recorder with a component cable setup?
Yes and No.If I understand the question correctly, you want to connect your cable box to your HDTV via HDMI, your DVR via component cable (Red, Green and Blue RCA connectors), and your VCR via component cables. Your HDTV should accept various video inputs - HDMI, component, and composite (the yellow RCA connector). Most argue that the HDMI connection will provide the best quality video. Next in quality is component video. Last is composite video. Your cable box may or may not have an HDMI connection. If it does and you subcribe to HD channels from your cable provider, then definitely use HDMI to connect to the cable box. If you have another HDMI input available on your TV, then connect it to the DVR (if the DVR has the HDMI output). Your VCR will likely have to be connected via composite cable. It's a crappy signal but VCR don't provide a great signal to begin with. Most VCRs only offer a composite (at best) output, anyway.
Your HDTV does not have an hmdi input how should you connect your cable box to the tv?
In descending order of quality, Component, S-Connector then Video. The RF or antenna input is the poorest.
What if your HDTV does not have an HDMI cable input?
Use the component input.
How do you connect n64 to digital galaxy projector?
Connect the av cable video plug to the composite video in (yellow). Connect the left and right audio to the stereo audio input, or connect these to your surround sound system.
How do you connect your Sony cmt-dx2d to a tv?
1.for video composite cable yellow use rca male to rca male video cable. or component (recommended if tv has this input) 3 pairs of rca male to rca male video called rgb cable. 2. for audio out use pair of rca male to rca male cable.
If you take a video source outputting component video and use component cables but connect it to a display source that uses composite connections what's the highest display resolution you can get?
Component video is carried on three wires, normally referred to as YUV or Y, Pb, Pr. The Y component carries the luminance information - the brightness. The other two carry color information. Connecting a component signal to a composite input will be difficult as composite uses a single connector that carries brightness and color signals on the same wire. If you connect the Y of the component signal to the composite input, you will see a monochrome image. With a very, very few exceptions, analog component video is limited to standard resolution, so the highest will be 480 line (North American) or 576 line (European). Composite connections handle only standard definition and there is no composite standard for HD video.
How do you use optical cable from tv to Blu-ray?
Your TV will not have a optical cable input. The easiest way is to connect an HDMI cable from the Blu-Ray player to the TV. This cable will have both the video and audio together. If you do not have an HDMI input on your TV, use the component video output from the Blu-Ray player and the analog left and right audio to connect to the TV, or connect the optical digital output from the Blu-Ray player to a surround sound receiver for sound amplification.
How do you use a HDMI cable with the vbox2?
It does not have an HDMI input and only component cable inputs on the Vbox2 advanced
How do you connect the sony home theatre to laptop?
Your home theatre system will need both an HDMI input and output. Most all-in-one systems have no HDMI input. Connect the output of the laptop to HDMI input of the receiver. Connect the HDMI monitor output on the receiver to the TV.
