Can you fit a 300tdi front bumper to a 200tdi
how do you screw off front bumper to a land rover discovery 2001
On a Series 1 Discovery just UNBOLT the CENTER section of the bumper fascia. (the plastic part) Then, using a dremel or similar rotary tool, cut the ends @ the angle line to match.
Cut 2 inches off the Grill
Costs will vary when replacing a front bumper on a Land Rover depending on location. However, it is relatively inexpensive and easy to replace a bumper on a Land Rover.
no
The front fenders on your Land Rover Discovery are held in place with eight retaining bolts. Remove the retaining bolts and the front fender will come off.
lsndrover discovery 2007 front fogs not working and switch not showing on on dash
10 to 12 MPG
at the front of the engine beneather the camshaft pulling
It can be done but it is not a straight swap of just the headlights, you need brackets and a bumper at least. There are kits available to upgrade the lights, but they are expensive as its not just a simple straight swap and the electrics are modified.
Discovery Series 1 and Series 2 share engines but not all brackets with the Defender, this is the 200TDi, 300TDi, TD5 and V8 (where available).
Land Rover Discovery was created in 1989.