nope, nada ,no way
The height of a standard toilet seat is 14" from a furnished floor.
Crane, American Standard are decent brands
www.lockeplumbing.com
That depends on who is to use the toilet. children's toilet seats (in schools for example) are much lower than in an apartment and old peoples homes have even higher seats. The Swedish standard toilet height (to the rim not including any seat) is 420 mm.
Either search the internet or try trade me!
"Better off" below should be amended to say "NO." You cannot replace a Flushmate with a regular toilet valve. I have tried it, and I can tell you for certain that is does not work. The bowl itself is specially designed to work with the Flushmate system. Observe the shape and path of the pipe going from the tank to the bowl and compare to a regular toilet to see the difference. If you replace the BOWL, then you can replace the Flushmate system in the tank with a standard valve, as the TANK is the same as a toilet without the Flushmate system, but the BOWL must be designed to work with Flushmate. DIsclaimer: I am not a plumber, this is based on my own experiments and observations as a money-grubbing homeowner. No your better off throwing the flushmate away with the toilet and buying a new T&B
On a standard toilet in America the drain is 12 inches from the back wall to the center of the drain.
You would need to use a container of water like a 5 gallon bucket and pour it into the toilet. As you pour it in, the excess water will cause the toilet to drain.
Will a American standard toilet tank fit a glacier bay toilet
No the standard toilet seat covers are for the standard round toilet seats. The universal will fit the long oblong shaped toilet seats.
Yes, I have an American Standard toilet and an Olsonite toilet set.
You can install the vanity first. Then, install the tile up to the vanity and around the pipe for the toilet. Then, install the toilet. That way, you do not have to replace the tile should you ever have to replace the toilet.
The time it takes to assemble and install a new toilet is about one hour.
Yes, you would indeed need a permit to install another toilet. They are easy to get.
No, toilet seats are not hard to install. There are two bolts that go through the rear of the opening on the toilet and when these bolts are secured, the seat is installed.
The standard dimensions for a toilet can vary depending on the country you live in. The American standard is either 14 or 15 inches.
When you purchase a new toilet seat, it is going to come with the instruction manual as to how to install the seat, when you get it in your home for installation.