i wouldn't suggest it. travertine is stone, which will expand and contract with temperature changes. if there is not a grout line the stone will crack
Yes you can install the travertine without a grout joint. Even though you butt the tile together it will still create a very small grout joint. Make sure you still grout it to fill all of the voids. It is most important in wet areas or you will have a huge problem.
Yes (if it is unsealed). Otherwise the grout will stain it.
No, the grout allows for tile expansion and contractions, without it your tile could crack but there are some tile that can be installed with minimal (1/16inch) grout lines.
form_title= Tile Grout form_header= Give your home a face lift with new tile grout! Do you want to install new grout?*= () Yes () No () Not Sure Do you want to clean out old grout?*= () Yes () No () Not Sure What color do you want the grout?*= _ [50] How old is the grout in your home? *= _ [50]
You are going to have a seam one way or another. But the bigger the slab of marble, the fewer seams. And you can use an epoxy to fill the gaps, but it will still look like a seam. And without the grout, you can have some serious expansion problems.
no you need a grout line
Yes you can install the travertine without a grout joint. Even though you butt the tile together it will still create a very small grout joint. Make sure you still grout it to fill all of the voids. It is most important in wet areas or you will have a huge problem.
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
Yes (if it is unsealed). Otherwise the grout will stain it.
No, the grout allows for tile expansion and contractions, without it your tile could crack but there are some tile that can be installed with minimal (1/16inch) grout lines.
On antiqued finished the minimum is 1/8" grout line. On the honed you might be able to get a 1/16" grout line depending on the edging.
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
form_title= Tile Grout form_header= Give your home a face lift with new tile grout! Do you want to install new grout?*= () Yes () No () Not Sure Do you want to clean out old grout?*= () Yes () No () Not Sure What color do you want the grout?*= _ [50] How old is the grout in your home? *= _ [50]
Not JUST a grout no. You can get a cement that will also work as a grout but a pure grout would not have the adhesion required to stick the tiles to the wall properly, you should not use it as a cement.
You are going to have a seam one way or another. But the bigger the slab of marble, the fewer seams. And you can use an epoxy to fill the gaps, but it will still look like a seam. And without the grout, you can have some serious expansion problems.
The most practical way if holes are larger then 1/2" is to replace the tile. If the space is 1/2" or less sanded grout can be used.
you will have to wait a month