no probably not , you might have overloaded it with to much power
This scenario can not happen due to the different configurations of the plugs (caps) that are used for different voltages and amperages.
This scenario can not happen due to the different configurations of the plugs (caps) that are used for different voltages and amperages.
This scenario can not happen due to the different configurations of the plugs (caps) that are used for different voltages and amperages.
A crab adapter converts the crab from 120 volts to 220 volts.
If the manufacturer specifies that a certain voltage is needed for their equipment, then that is the voltage that must be applied to it. To do otherwise may ruin the equipment and void the manufacturer's warranty.
No, you will need to obtain an adapter to change the 120 volts to 230 volts. The adapter must be sized to the load wattage of the 230 volt appliance. To find the load wattage multiply the amperage times the voltage of the appliance. Once this is assessed, the size of the adapter or transformer will be of equal or greater value than that of the connected appliance. The adapter will be rated in VA or KVA depending on the needed load amperage.
just the metal parts
No, if you use a 6 volts adapter instead of a 9 volts adapter, you will be supplying 3 volts too little to the item that requires 9 volts. Either it may not work properly or it won't work at all. The fact that the 6 volt adapter can supply more current (2000 mA instead of only 1200 mA) won't help solve the problem of having insufficient voltage.
You give it more volts and it will burn out something!!
No, the voltage is wrong. The device needs an adapter that only produces 5 volts. The device that you need may state on it 2500 mA instead of 2.4 amps
difference is 2.7 amperes in numbers will be 12 volts 3 amps and the other will be 12 volts .3 amps
No, it must be charged with a battery charger plugged into 120 volts AC which converts it to 12 volts DC.