0
Yes but not recommended. Even with the smallest grout lines, you should still use some kind of grout preferably unsandedgrout just match it with the color of the granite for a smooth continuous look.
Wiki User
∙ 15y ago
Wiki User
∙ 9y agoNo, you will need grout to prevent water from getting behind the tile. If you are really skilled, you can do it at 1/16, but that is a very precise task.
Add your answer:
Earn +20 pts
How do you tile a bathroom?
To tile a bathroom, you must first find the center of the floor or wall. This is where you will lay your first tile. You work out from there. This way you have the cuts where they are less noticeable. Use a trowel to place tile glue on the tiles, put them in place. Use spacers to keep them apart at an equal distance. Use a tile cutter to cut tiles in areas where a whole tile is not needed. Once you are done, remove the spacers and use a trowel to grout between the tiles. Wipe away excess grout with a wet sponge.
What is the cost of installing ceramic tile in a new home in North Carolina?
You didn't give us enough information. Tile floors thoughout the house? Tile bathroom walls? We need measurements for either of those things. Did you aleady buy the tile & grout? If so, you plan on $20-$25 hour to lay it.
Is there an online course to learn how to lay tile?
Youtube is a great place to go to find instructions on how to lay tile.
Can you lay concrete tile on dirt without a base?
The answer to your question is yes you can, however it should hold for about a week or so but not last. What you want to do is pour about 3" of concrete and then install the tile.
Can you lay cermic tile over laminate floating floor?
No, ceramic tile needs a firm subfloor, without movement, and one not prone to moisture. Laminate is none of those.
What is a standard layout for tile?
Depends whats in the room,tubs,walls, Find the center get your chalk line and grid the room. Lay loose tile on the floor line them up with the grout joint you want to use and figure out the layout that is going to have the least amount of cuts. I always make sure I have full tile at doorways if I can,it looks better. If you are in a room that is way out of square,do a diaganal pattern.
What tools are needed to install shower units?
There are many tools needed to install shower units. There needs to be a grout tray to help lay the tile, screw driver to install the shower head and a caulking gun to seal off the seal.
How to Lay Bathroom Floor Tile?
Modern ceramic and stone tiles provide a plethora of design options, and resist wear better than many materials. Laying bathroom tile may sound like a formidable job, but if you follow a few simple guidelines, you can create a room of beauty and elegance.Installing the tilesSnap chalk lines across the width of the floor. Measure the size of your tile and the width of one full grout joint; this is how far apart the chalk lines will be.Start with a small area and apply adhesive up to your chalk lines using a notched trowel. Do not apply more adhesive than you can cover with tile before the adhesive sets up.Press a tile into place and twist it slightly to make sure it is firmly set.Place a spacer between the tiles to make sure the tiles are evenly spaced.Applying the groutMake sure the adhesive has completely cured before applying the grout, usually 24 to 48 hours.Remove the spacers.Mix the grout according to the manufacturer's instructions. Mix enough to fill all of the joints.Place a trowel full of grout onto the tile. Use a float or squeegee to push the grout into the joints. Use sweeping strokes at a diagonal to the grid pattern.Make several passes over the same area to compact the grout into the joint.Do not use grout to fill the joint between the last row of tile and the wall. Apply a flexible silicone caulk in this area.Strike the joints to create slightly recessed seams. This can be done using a toothbrush handle, small spoon or a shaped stick. Press the tool into the grout, sliding back and forth just enough to indent the seams slightly below the level of the tile.When the grout is firm, use a wet sponge to wipe off excess grout from the tile surface. It may take several passes, and you may need to do a final polish of the tile surface with a clean, damp cloth.Sealing the jointsIt may take several days for the grout to completely cure and you may need to wait even longer before applying a sealer. Check the grout label directions.Start in the corner farthest from the door and apply a thin, even coat of sealer on the grout. Some sealers come with a built-in applicator, or you can use an artist's brush.
Can you lay a penny floor over laminate?
I'm guessing that you mean penny round tile. If so, no should never lay this over a laminate floor. Laminate floors are floating, so they move and your tile/grout will crack. You are also not supposed tile on top of any form of wood (laminate is recycled hardwood), because it expands and contracts so it will also cause the tile and grout to crack. You should remove the laminate. And then install on top of either smooth concrete, level it or add in cement board. If, however, you actually mean vinyl, then it depends the condition of the vinyl. It's usually better to remove it, but you might be able to get instead pour 1/2 self leveling cement or put cement board on top and then install. Your floor should be smooth and level before installing the tile.
How do you install granite tile countertop?
step 1: 3/4 inch (finish) plywood screwed to top of base cabinets. cut out for sink area step 2: 1/4 inch cement board screwed every 6 inches on center onto the plywood top and front face of plywood. . .mortar between the joints and float smooth step 3: lay out the tiles and precut the pieces. you'll have to precut for the sink area by laying the tiles around perimeter and marking from below. i also cut the front pieces at a 45 degree angle and wetstoned them to a shine step 4: quickset mortar trowelled onto the cement board with 1/4 inch ridged trowel, one small area at a time so it won't dry before you set the tiles step 5: set the tile into the grout, leaving a small gap between tiles for grout (i used dimes standing on edge between tiles). For front pieces, butter the back of the tile with mortar and push into place, hold in place with painters tape. . .let dry at least two hours step 5: grout between tiles, pushing the grout into the seams with a rubber grout float. . .there are many colors of grout available (make sure you use un-sanded) step 6: sponge off the excess grout lightly, let dry, then wipe the haze off the tile with soft cloth
How do you fill with grout?
First you lay out all the tiles with spacers adhering them to the floor, then you grout between by scraping across surface of tiles. Then just wipe clean. The grout is like a concrete mix & will harden.
Do you need a license to lay tile in Wyoming?
No
