You can paint a lot of things. It depends on what you are painting. If you are painting metal then use metal paint if you are painting wood then use wood paint if you are painting something flexible such as rubber, thin plastic, or fabric then use vinyl paint. Some objects require primer which you put on before you put on paint to make the paint stick. Most wood objects require paint to be rolled on such as a house or any another large wooden object. Smaller wooden objects would be easier to spray paint such as a wooden chair. All metal objects and some wooden objects need to be painted with a professional paint sprayer that hooks up to an air compressor. All metal objects have to be spray painted. And all objects need to be sanded before painting to make the paint stick.
Good Luck :)
Yes you can. Use wet and dry sandpaper bout 800 first. Then use a primer called grip lock. U can use oil based or water based topcoats on the grip lock but just remember that furniture needs hard wearing paint like enamel. Enamel paints come both water and oil based.
yes, all the primary colors
Its not car paint, but Montana spray paint is definitely the best paint in a spray can. I dont think you will find actual car paint in an aerosol can, but I could be wrong.
yes but you can destroy it I have tried it before
It depends on the type of paint. Lacquer thinner will remove most oil based and latex paints from a paint sprayer, however, spray gun cleaner will remove it better.
Metal and Auto PartsLacquer paint is very common in auto accessories and other metal pieces. It forms a strong bond and is durable. Cast models can be painted with a lacquer spray. These are required easier to work with and won't require as much work.Wood and FurnitureLacquer spray can be used wood and furniture. If the piece is large you may want to purchase lacquer in a can. This requires more work and preparation. Paints are painted in ventilated areas very carefully. Lacquer has specifically designed for furniture. It's usually not as heat resistant as the metal lacquers are, but are much easier to get to adhere to the wood.Gloss LevelLacquer paints can be visible in low mattee as well as in High Gloss finish.High Gloss paints will look great in on car parts and on some furniture. The low matte will look less like a traditional lacquer finish but still gives the advantage of durability and strength.
liquid, gas-charged, pressurized, wet, enamel paint, or lacquer
No, the solvents in lacquer are to hot and volatile. The lacquer will cause bubbling of the acrylic paint.
No, the solvents in lacquer are to hot and volatile. The lacquer will cause bubbling of the acrylic paint.
Its not car paint, but Montana spray paint is definitely the best paint in a spray can. I dont think you will find actual car paint in an aerosol can, but I could be wrong.
Buy a can of spray lacquer and paint it.
yes but you can destroy it I have tried it before
yes I've tried it before.
It depends on the type of paint. Lacquer thinner will remove most oil based and latex paints from a paint sprayer, however, spray gun cleaner will remove it better.
Yes. But you can't do the reverse. So if your primer is lacquer-based you can spray an over-coat of enamel on the top.
yes
Clean, Aim, and pull the tiigger.
I'd give the paint 24-48 hours to dry thoroughly. If you lacquer too soon the paint may crack etc underneath. Give it 2 days in a warm environment and then it'll be okay to lacquer.
Black spray paint because it absorbs while tin foil reflects. So you know that the black spray paint will get hotter/ warmer faster.