Most PVC glues are rated for 40 - 110F. Weld On 725 is recommended for use in colder weather . You can use standard PVC Glue but it will take 2-3 times as long to cure before you can pressure test it. The colder it is, the longer the curing time.
I don't understand why you'd want to do that . CPVC glue is expensive, PVC glue is cheap and glues PVC pipe better.
Yes PVC glue is safe for electronics because it is not a conductor and it bonds electronic components.
Christy's 'Red Hot Blue Glue' is an excellent product to use on Sch.80 or 40 PVC.
I recommend a brand of glue called Goop. And if you use it, remember that it takes a full day to harden.
if your waste pipe is PVC and your glue is for PVC . yes! but make sure to use a primer(cleaner) on the pipe first.
NO, PVC is very sensitive to which glue is used. In Domestic pipe applications you should use Weld-On 711
NO. Although you may have plumbers PVC glue, it doesn't work well with flexible PVC like an inflatable. -Better products are Aqua Seal (available in Walmart Sports Dept) or 3M Marine Adhesive.
You can not glue brass directly to PVC pipe. Use male/female adapters to join these two materials. ie, a male threaded PVC end fitting glued to the PVC pipe and a female threaded brass fitting screwed onto that.
There are many solvent glues that have been specifically formulated for use with different plastic pipes. Depending on the schedule of the piping 40, 80 etc what type of glue you want to use, some are slow setting some set very quickly and the choice of the glue also would depend on the ambient temperature and humidity factor. It also depends on whether you want to use the glue for waste or water. Water PVC pipes need high pressure glue where as waste pipes don't.
You should not use regular PVC glue at lower temp than about 40f. -The glue is too thick and will not make good bonds this cold. -Weld On 725 is recommended for lower temperatures.
Use teflon tape with a little pipe dope. If you don't ever have to take apart again then you can use glue which you are calling cement
The best is Weld On 711 when used with purple primer.