answersLogoWhite

0


Best Answer

For USA, Canada and other countries running a 60 Hz supply service.If you're wanting to power a 30 amp dryer with a 50 amp circuit, that's possible.

The 50 amp circuit should already have the heavier wires that the oven needs, to carry up to 50 amps safely.

You must change the fuse or circuit breaker to one rated for 30 amps or your dryer would not be protected from overload faults. And leave a note in the breaker box so the next do-it-yourselfer will know the wiring can handle a 50 amp load.

Further note

If this question were asking the other way around - the dryer needs 50 amps but the circuit wiring is only safe to use for 30 amps - the existing 30 amp oven circuit would be unsafe to use because, in certain conditions, the wiring could overheat and could start a home fire. That is why doing this would be contrary to the wiring codes.

As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.

Before you do any work yourself,

on electrical circuits, equipment or appliances,

Always use a test meter to ensure the circuit is, in fact, de-energized.

If you are not already sure you can do this job safely and competently... Refer this work to qualified professionals.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Can you use an extension cord to convert an oven socket outlet to a dryer outlet by using an extension cord with a 50A male plug and a 30A female socket?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why are the contacts in an electrical extension cord further back then a normal wall outlet?

A good, solid, connection between the socket's female contacts and the plug's male contacts, with a maximum area of overlap is essential. So there should be no difference whatsoever between the physical location of an extension cord's contacts and those of a wall outlet.


Can you convert a garage light socket to accept a three prong shop light plug in?

If you want to you could remove the light socket and put in an outlet then plug your light into the outlet.


What is the function of outlet socket?

funtion of outlet socket


What difference between 13Ampere socket outlet and 15Ampere socket outlet?

2 Amp


What is s.s.o.13amp?

Switched Socket Outlet


Advantages of ring connection of socket outlet compare to radial connection of socket outlet?

Ring connection ensures continuety in supply


Can an extension cord plugged on a 230V socket outlet be used to connect a fully wired container with a distribution box?

You should know the maximum current drawn from the distribution box (in amps) and that must be less than the current that the extension cord is able to supply.


How do you change a 110 socket outlet into a 210 socket outlet?

You probably mean to change it to a 240 V outlet... either case, you'll need to run a new wire and install a new breaker.


SSO electrical Wiring?

switch socket outlet


What symbols represents a switch socket outlet?

square


What is the common way of referring to a plug and its corresponding socket as per the electrical engineering terminology?

Plug and socket, plug and socket outlet, plug and receptacle or plain plug and outlet all seem to be in common usage in the US. Plug and socket is possibly the only wording commonly used in the UK. [Plug and socket outlet sounds ok to a me, as a Brit, but we never really use that expression in the UK. Plug and outlet or plug and receptacle actually sound very strange!]


What is the function of a 13 A Switch Socket Outlet?

It enables you to switch off the load from the socket, rather than have to pull the plug out of the socket.