You can use a regular nut in place of a lug nut in an emergency situation and only for a short period of time. Lug nuts are shaped to "seat" into the hole on the wheel and ensure that the wheel is tight to the hub. A regular nut does not seat, or bottom out, and will allow the wheel to move and cause wear on the stud and the wheel itself.
There are a couple of different tools that are good for tightening lug nuts. A torque wrench and a lug wrench are good for tightening lug nuts. Typically lug nuts would be tightened with a torque wrench, but a lug wrench is much cheaper.
KIA lug nuts are the same as other lug nuts on other car makes. To remove or tighten them, use a standard lug nut wrench or the one found in the trunk of your KIA.
Lug nuts are rounded pieces used to attach a vehicle's wheel to its axle. This ensures that the vehicle's wheel is secure. Failure to use correct lug nuts for your vehicle can result in wheel damage.
Locking lug nuts are just as strong as standard lug nuts, just as long as they are correctly installed with the proper locking lug nut key wrench.
The torque for the lug nuts on a cat backhoe 426c depend on what size the lug nuts are; for 1/2 lug nuts the torque should be around 80; for 9/16 lug nuts the torque should be around 140.
5 lug nuts on
5 lug nuts ...
Remove old lug nuts replace with new one. I recommend buying lug nuts from toyota dealers. OEM lug nuts last longer than aftermarket.
use a flat head screw driver.
5 lug nuts per wheel, so there are a total of 20 lug nuts on a Taurus - Sable.
There are five lug nuts on one per tire, equalling 20 total lug nuts
On a 2003 Lincoln Navigator : There are ( 6 ) lug nuts for each wheel ( total of 24 lug nuts )