you need a double ended jack and plug one end in the ipod and the other end into the paper jam
cookies
A paper jam is when something is printing out, but the paper gets itself stuck (or "jam" itself) in the middle of the operation. These may be caused by misalignment of paper, by using low-quality paper (e.g paper that isn't even white, is too thin, e.t.c), or by having the wrong ink for the brand of printer. They are quite easy to solve - simply pull your paper out, and follow any prompts.
clears paper jam
In black and white -- on paper... everything moves on paper and leaves behind a paper trail. Sometimes there is a paper jam....
I had the same problem with my TX550W. By loosening the paper guide a bit made it easier to load the paper and it hasn't jammed once.
It will jam the printer
The Kodak i60 only uses plain paper. Photo paper may jam in this machine.
One can fix a paper jam on a photocopier machine by: assessing the situation, locating the problem area, pull the paper out through the paper path and clear all stuck paper from the machine carefully including small pieces, close the machine and run a test page.
The issue may occur if during printing, the paper becomes stuck in the printer and the error message 'Paper Jam: Clear jam, and then press Enter' displays on the control panel display To resolve the issue: Initialize the printer my performing the power cycle. Connect the printer directly to wall jack (without surge protected, ext box) Check for and remove any loose paper from the In tray Clear the jam from the back of the printerRemove the rear access door to clear the paper jam Verify that the print carriage can move freely Reload and test the printer
Printers use various sensors and detection mechanisms to sense a paper jam. Here's how it generally works: Paper Path Sensors: Printers are equipped with sensors strategically placed along the paper path. These sensors detect the movement of paper as it travels through the printer. If the paper stops moving or encounters resistance due to a jam, the sensor will trigger an alert indicating a paper jam. Optical Sensors: Some printers use optical sensors to detect the presence of paper. These sensors emit light beams that are interrupted when paper passes through the printer. If the light beam is not interrupted as expected, it signals a paper jam. Paper Feed Sensors: Sensors located near the paper tray or input feeder monitor the paper feed process. They detect if multiple sheets of paper are fed simultaneously or if paper is not feeding properly, indicating a potential jam. Mechanical Sensors: Mechanical sensors, such as switches or levers, are also used in some printer models to detect paper jams. These sensors are triggered when paper physically obstructs their movement or position within the printer. Error Codes and Alerts: When a paper jam is detected, the printer typically displays an error message or indicator light to alert the user. The specific error message may vary depending on the printer model and manufacturer. Once a paper jam is detected, the printer may pause or stop printing to prevent further damage or complications. The user can then follow the printer's instructions to clear the paper jam and resume printing. Overall, the combination of sensors, detection mechanisms, and error alerts allows printers to quickly identify and respond to paper jams, helping to maintain smooth printing operations and prevent damage to the printer.
throw that sh?t away