0
Depending on accompanying certifications, between 50,000 and 110,000. Sorry so broad but that's fact!
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How much does a ndt weld inspector make?
It all depends what method(s), experience, and what level you are. It can be anywhere from about $35,000 - $175,000
Butt-weld and grrove weld?
First, Butt-weld is short for a butt groove. Welding in a butt-groove starts at the throat of the butt-groove. The first weld point could be a tack-weld: holding the two materials to be welded together. The throat is measured and filler metal and electrode are determined to create the root pass.
What is peening in welding?
It is one way to "Stress Relieve" the weld joint. As the weld metal metal cools it contracts and hammering on the weld expands it. On thick sections it is done after every layer of weld. Often used when welding cast iron or other metals with a low COE (Coefficient of Expansion).
Is there required size for a seal weld per AISC?
The required size for a seal weld per AISC is eighteen foot length. AISC also specifies minimum weld size based on the thicknesses of the members joined.
What is the filet weld size required for weldolets to main pipe joint?
wildly welding main pipe the are fillet weld or butweld
How much does a ndt weld inspector make?
It all depends what method(s), experience, and what level you are. It can be anywhere from about $35,000 - $175,000
What is a b pressure welder?
This welder is certified to weld on pressure vessels. Testing is done on the weld either by X-Ray or pressure test. The root pass is inspected then the final pass is inspected during the test. If either inspection turns up a flaw, the test is over and you fail.
How close can one weld be to another weld?
Depends on what you are welding, but generaly welds can meet, or even weld on top of a weld.
Who is Theodore Weld?
Theodore Weld
Where is the Weld Public Library in Weld located?
The address of the Weld Public Library is: 25 Church Street, Weld, 04285 0120
How do I get my welding certification?
To become a certified welder you will be based on your performance and experience. The Certified Welders Test uses procedures structural steel, sheet metal, petroleum pipes and chemical refinery. If you want to find the nearest testing center you can contact them at (800) 443-WELD, ext. 273.
Where is the Weld Historical Society in Weld Maine located?
The address of the Weld Historical Society is: Po Box 31, Weld, ME 04285-0031
What is the difference between butt weld and socket weld?
A butt weld is a weld made between two straight cut profiles , a socket , or plug weld is made between a surface and a hole.
When was WELD - AM - created?
WELD - AM - was created in 1956.
What is the birth name of Tuesday Weld?
Tuesday Weld's birth name is Weld, Susan Ker.
What is the birth name of Bill Weld?
Bill Weld's birth name is William Floyd Weld.
What is girth weld?
circumfrencial weld is sometimes referred to as Girth weld. its just another term.
