Sounds like you have a head gasket blown. Check the oil to see if you have any water in the oil. If not that is good. You can also remove your spark plugs one by one to see which gasket is blown, whether it be your drivers side or passenger side. Hope this helps.
where is the crank sensor located on a 2005 chevy impala
Blue smoke is oil smoke, sounds like you need an overhaul. either the piston rings or valves are allowing oil to enter the combustion chamber. because when you crank it oil also comes out
Chevy did not use a crank sensor on that year.
trying to locate crank shaft sencor for 1993 Chevy lumna trying to locate crank shaft sencor for 1993 Chevy lumna
a Chevy 350 crank is a Chevy 305 crank. they have the same stroke, 3.48 inches, and are interchangable. swapping between the two cranks does not change the engines displacement
Just the crank. The flywheel is neutral.
No.
install 3.8 Chevy impala crank sensor passenger side , remove wheel and use pully to pull out crank shaft
A crank sensor was not USED on a 1995 model.
Remove the inside door panel of your 1997 Chevy Lumina. Remove the linkage to the window crank. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
behind the window crank
That year model does not have a crank sensor.