G-force (acceleration due to gravity) is a measure of the force applied to particles in a centrifuge, while RPM (revolutions per minute) is a measure of how fast the rotor of the centrifuge is spinning. The relationship between g and RPM depends on the rotor size and radius. RPM alone doesn't provide information on the actual force being applied to the particles, which is why g-force is often used as a more reliable measure in centrifugation.
What is the difference between RCF and RPM when considering microcentrifuge tubes? = RCF = 1.1118 x 10-5 x r x RPM2 = (r = rotor radius in cm)
The relationship between RPM and centrifugal force (g) depends on two inputs, distance from the central axis and speed. A chart called a nomogram is typically used to determine the g-force exerted at a specific RPM.
The relationship between revolutions per minute (RPM) and relative centrifugal force (xg) is: g = (1.118 × 10-5) R S2 where g is the relative centrifugal force, R is the radius of the rotor in centimeters, and S is the speed of the centrifuge in revolutions per minute. You can use this for any centrifuge, just measure the radius of the rotor from the center to outer edge.
The difference between an N and a G router is all in what the purpose of your router is for. You need to see if you are using it for a personal or business use.
D. G. Avery has written: 'Uranium enrichment by gas centrifuge' -- subject(s): Centrifugation, Uranium enrichment
i want to know the difference also
one is better
3620 g
that pig spelling is P-I-G and pia doesn't have a G in it.
Positive g-force is down. Negative g-force is up.
1500g
The difference between dexron 3 g and dexron 3 h is that dexron 3 g is used to be the factory fill quality. Dexron 3 g was the requirement for service fill quality.
g