The opposition to AC current flow in a circuit due to induction is called inductive reactance.
The process of generating electrical current in a conductor by placing the conductor in a changing magnetic field is induction or just induction.
a circuit in which inductance L,capacitance C and resistance R are connected in series and the circuit admits maximumum current corresponding to a given frequency of a.c.Another AnswerIn the case of a series circuit, resonance occurs when its inductive reactance is exactly equal to its capacitive reactance. As the vector sum of these two quantities will then be zero, the only opposition to current will be resistance and, so, maximum current will flow through the circuit when resonance occurs. ALL circuits can be made to resonate at what is called their 'resonant frequency' because, as frequency increases, the inductive reactance increases but capacitive reactance falls -so, at some point the two will equal each other, and resonance will occur.In my view resonance means - the condition that exists when the inductive reactance and the capacitive reactance are of equal magnitude, causing electrical energy to oscillate between the magnetic field of the inductor and the electric field of the capacitor.
An impedance diagram (sometimes called an impedance triangle) results when a series circuit's voltage phasor diagram is divided throughout by its reference phase (current) -this results in resistance (=VR/I), inductive reactance (=VL/I), capacitive reactance (=VC/I) and impedance (=V/I) andillustrates the Pythagorean relationship between the circuit's impedance, reactance, and resistance.
Main difference is that , that the auto_t is electrical based while the other t is based on mutual inductance.
A capacitor is a device that resists a change in voltage, proportional to current and inversely proportional to capacitance. dv/dt = i/c An inductor is a device that resists a change in current, proportional to voltage and inversely proportional to inductance. di/dt = v/l In an AC circuit with capacitive loading, the current waveform will lead the voltage waveform; while with inductive loading, the current waveform will lag the voltage waveform.
INDUCTIVE RESISTOR:Any circuit in which change in current is accompained by change in flux and therefore by inuced emf is said to be inductive. NON-INDUCTIVE:if a double wire is wound arround an insulating rod,the emf can not be induced because the wire is doubled back on itself at its centre and the doubled wire is wound arround an insulator.thus every turn of the coil has adjascnt turn which is carring current in opposite direction.the magnetic field generated by each other cancel out each other effect.hence no emf is induced in coil and coil has zero inductance.
Resistance is a concept used for DC. the current through a resistance is in phase with the applied voltage Reactance is used for AC the current through a inductive reactance lags the applied voltage by 90 degrees. the current through capacitive reactance leads the applied voltage by 90 degrees. the net reactance is the difference between inductive and capacitive reactance
there is no such thing as static var cenerator but if you meant static var generator then the difference is the same. it is one in the same thing, a combination or inductance and capitance to generate either reactive inductance or capacitive reactance.
IMHO, there is no difference
a circuit in which inductance L,capacitance C and resistance R are connected in series and the circuit admits maximumum current corresponding to a given frequency of a.c.Another AnswerIn the case of a series circuit, resonance occurs when its inductive reactance is exactly equal to its capacitive reactance. As the vector sum of these two quantities will then be zero, the only opposition to current will be resistance and, so, maximum current will flow through the circuit when resonance occurs. ALL circuits can be made to resonate at what is called their 'resonant frequency' because, as frequency increases, the inductive reactance increases but capacitive reactance falls -so, at some point the two will equal each other, and resonance will occur.In my view resonance means - the condition that exists when the inductive reactance and the capacitive reactance are of equal magnitude, causing electrical energy to oscillate between the magnetic field of the inductor and the electric field of the capacitor.
Current lags voltage in an inductive circuit. The angle by which it lags depends on the frequency of the AC, and on the relative size of the inductance compared to the resistance in the circuit.
armature reactant means loss in armature associated with inductive properties of the coil, while armature reaction include losses due to magnetizing component of current flowing through armature.
A purely resistive load is one in which there is no capacitive or inductive reactance. Whe driven by an AC voltage source, such a load will have no shift in phase angle between voltage and current.
A circuit with a voltage of 240 volts and an inductive reactance of 30 ohms would have a current of 8 amperes.Reactance works just like resistance. The difference is that the phase angle between voltage and current is not zero, so the ratio of true power versus apparent power is not one.Phase angle and power factor depend on frequency. This was not specified in the question, so it is not answered.
An impedance diagram (sometimes called an impedance triangle) results when a series circuit's voltage phasor diagram is divided throughout by its reference phase (current) -this results in resistance (=VR/I), inductive reactance (=VL/I), capacitive reactance (=VC/I) and impedance (=V/I) andillustrates the Pythagorean relationship between the circuit's impedance, reactance, and resistance.
Impedance is the net reactance(for Capacitors and inductors in the circuit) / Resistance of the circcuit whereas reactance is the prperty of the individual passive components ( only capacitors n inductors) to resist the flow of charge.
The descriptive statistics deals with prediction. The inductive and the deductive statistics basically deals with presumption. The inductive statistics is used in making predictions.
both are AC sensitive phenomena.. and opposite of one another..