Radiator Covers can actually increase efficiency, as they can be designed to push the air forward instead of straight up. This improves air flow around the room, prevents the air from just sitting under the ceiling, and lowers the amount of heat the wall absorbs.
True
Car or truck- summer yes,,,,winter no, increases it. House- yes and no, depends on the MFG of the cover.Check the specs for each MFG.
No. made it cost more. :(
Apply lean manufacturing methods to reduce stock, waste and improve efficiency, implement quality improvement program to reduce failure/reject levels (Six Sigma), use Rapid Prototyping to reduce development time, undertake an energy efficiency audit to reduce associated overheads
because u can compress it,
Reduce the friction of it and the ramp, for example, mounting it on wheels.
Answering "http://wiki.answers.com/Q/Does_radiator_covers_reduce_radiators_efficiency_for_houses"
Car or truck- summer yes,,,,winter no, increases it. House- yes and no, depends on the MFG of the cover.Check the specs for each MFG.
Reduce the throttle setting - ease up on the gas. Improve the efficiency of the radiator. Get a bigger radiator, fit an Electric fan, make sure the water pump is working OK. Flush the radiator. Fit water injection to the Engine. Fit an oil cooler.
Either improve efficiency or reduce quality
There are several causes that will reduce the water level in your car radiator. The most common cause is evaporation. Engine overheating will also reduce the radiator water level.
false
Cool radiator. This is the type of radiator that decreases the efficiency of the fuel and thus the conductor becomes angry and so does the hot brunette.
That is the item that is between the radiator and the grill, It covers the front of the radiator.
Yes, they are.
An energy efficiency paradox is when there is a high demand for energy as much as there are new developments in trying to reduce its consumption
In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.
No. made it cost more. :(