its easier to put the pulley on first, then thread the belt up to the pulley then use a wrench to pull against the spring on the pulley, then slide the belt in. using a 15mm wrench on the bolt or an Allen will give you all the leverage you need for an easy install
No
Loosen the tensioner pulley. Slide the tensioner pulley to the right. The serpentine belt will come loose. Remove the serpentine belt. Reverse the process to install the new serpentine belt.
The belt tensioner is self-adjusting.
Put the serpentine belt around the pulleys on your 2001 Chrysler LHS. Tighten the serpentine belt by pushing the tensioner pulley to the left. Tighten down the tensioner pulley and the serpentine belt will be tight.
Loosen the tensioner pulley. Pushed the tensioner pulley to the left. The serpentine belt will come loose. Remove the belt. Reverse the process to install the new serpentine belt.
Install a new tensioner pulley. If a serpentine belt is loose then the spring in the tensioner pulley is probably weak or the tensioner pulley is hanging up on something. Have fun! Chris
You will need to loosen the serpentine belt tensioner pulley on your 2002 Chevrolet Avalanche. Slide the belt tensioner to the right. The serpentine belt will become loose and can be removed. Reverse the process to install the new serpentine belt.
To remove the serpentine belt use a 1/2" breaker bar to rotate the tensioner upward off the serpentine belt while removing the belt from the pulleys. When installing the new belt make sure the belt is aligned properly in the grooves of the accessory pulleys(or the costly new belt will be shredded when the engine starts). Install the serpentine belt under the tensioner pulley by rotating the tensioner upward with the 1/2" drive breaker bar. When the breaker bar is released the tensioner will keep the belt properly tensioned.
You have to remove the belt first, this is easiest with a tensioner tool. Then the nut that holds it to the bracket is on the backside of the tensioner and needs to be done from the bottom.
Put the serpentine belt on to the pulleys of your 1994 Chevy engine. Tighten a serpentine belt with the tensioner pulley.
Put the new serpentine belt on to your 1992 Chevy Corsica pulleys. Push the tensioner pulley to the left to tighten the serpentine belt.
Remove the alternator wiring harness. Loosen the tensioner pulley. Remove the alternator belt. Remove the alternator retaining bolts. Reverse the process to install the new alternator.