Yes, the wire attached to the doorbell does carry an electric current and you can get a shock if you work on it without turning off the power first. Ideally, you should locate the specific fuse or circuit breaker for that particular wire, so you don't have to turn off all the power to the whole house. Be careful; electric shock can be very dangerous.
No. Police or Sherriff will have them turn it back on.
To install a doorbell, you will first have to turn off the power to the doorbell. Pull the doorbell unit away from the wall. Disconnect the wires that hold the door bell in place. You will then have to determine whether you want a wired doorbell or wireless. If you are using wireless tuck the wires back into the wall and place the wireless doorbell in place. For a hard wired doorbell, attach the wires to the door bell, push the excess wires into the wall and attach the doorbell to the wall.
No, when it's off it's off. A very small and insignificant amount is wasted when you turn the light on.
In a lighting circuit an open circuit will turn off the light.
The consumers manage it themselves, for example they turn the lights off when they go to bed.
To save electricity.
No. Police or Sherriff will have them turn it back on.
turn off light,save electricity
no because you need electricity to turn it on
If you do not pay the electricity bill, the electric company will turn off the electricity.
To install a doorbell, you will first have to turn off the power to the doorbell. Pull the doorbell unit away from the wall. Disconnect the wires that hold the door bell in place. You will then have to determine whether you want a wired doorbell or wireless. If you are using wireless tuck the wires back into the wall and place the wireless doorbell in place. For a hard wired doorbell, attach the wires to the door bell, push the excess wires into the wall and attach the doorbell to the wall.
You turn off the things that use it
Turn things, such as the lights, off.
I have a 2002 Grand Am SE- after I change the oil:) I have to turn ingition to on, but not all the way, just turn the electricity on in the car. press and release the gas pedal 5 times in a slow motion with a half second delay in between puishes., then turn off the car and turn it back on just like you would be to drive it. :)
No, because when you turn it off it flips a switch open so there is no path for the electricity to flow through.
You are able to turn on and off electricity.
Turn the lights off when the classroom is empty.