For a 1.8L, 2.0L, or 2.4L non-turbo the gap is 1.1mm (0.043 inches). For a 2.4L turbo the gap is 0.8mm (0.031 inches).
The standard star pattern used on most street cars.
It is similar to drawing a star in points, all the lugs must be tightened or loosened opposite from each other.
Red/positive cable to red/positive cable.
Black/negative cable to black/negative cable.
The battery is under the cover in front of the air cleaner.
The fuel filter is part of the pump module in the fuel tank.
In trying to answer this question: Where can you get a stock and forend for a model 1894 Winchester in
38-55 caliber manufactured in 1901 ?" There is a website call'ed Gun- Parts.com/ Winchester Stocks/. On this site
is a dealer who has part's - stock's, for all of the Winchester line of gun's
Rifle's and shotgun's . They also have picture's of them so that you can see
what they look like to. Anyone who need's part's or stock's for a Winchester should check it out. And the price's are not all that high either.
They are very reasonable as thing's go this day and age. I hope that this will be of great help to you, and good luck.
Jay C. Smith
DaytonaKid3@aol.com
Lack of rotation, aggressive driving, or a worn steering/suspension component.
Check the tie rods and ball joints.
There are two in the plastic housing on the driver side end of the cylinder head.
A failure in the electronic throttle control system. You need to have the system checked for codes.
4.5 quarts for all gasoline engines in the SXT model Caliber. Source, manual in the glove box.
I believe that it is located about midway down behind the radiator. I followed the intake tube and that seems to go int the ETC, weird place for it in my opinion,> i need to replace there ETC ( throttle body) as after cleaning the ending ( iwas trying to get rid of it) , it started behaving badly, engine RPM's will not go above 2500 rpm, no matter when you depress throttle. I found that I can at least drive the car and get it to upshift if I back off the throttle and let it upshift, but when I have to stop the trans does not downshift and bucks like hell. I quickly put in neutral and back into drive and it solves that problem. Still I need to replace TB the are available for about 180 online
If I'm not mistaken, it should be either 32 or 34 PSI.
One can find user reviews on the Dodge Caliber on many automobile websites. Edmunds, Auto Trader and The Car Connection have many reviews submitted by owners.
The Dodge Caliber has a timing chain, not a timing belt.
There are two. They are under the plastic housing on the driver side end of the cylinder head.