Ford F-350

The curb weight of a 1975 Ford F-350 typically ranges from about 4,500 to 5,500 pounds, depending on the specific configuration and options. Variations in body style, engine choice, and additional features can influence the exact weight. It's important to consult specific documentation or sources for the particular model you are interested in for precise figures.

The fuel injectors in the Chevy 4.3L and 5.0L engines are not the same and typically have different part numbers and specifications. While they may share some similarities in design, the flow rates and electrical characteristics can vary between the two engine models. It's essential to use the correct injectors specified for each engine to ensure optimal performance and fuel efficiency. Always consult the manufacturer's specifications or a service manual for precise information.

Ah, finding the block heater cord on your 2011 Ford Edge is like discovering a hidden treasure! It's usually located near the front grille or behind a panel near the front bumper. Take your time to explore gently, and remember, there's no mistakes, just happy little discoveries along the way.

A 1960 Ford F100 body could potentially fit onto the frame of a late model Ford F-150. However, modifications would likely be necessary due to differences in frame dimensions, mounting points, and suspension setups between the two vehicles. It is recommended to consult with a professional mechanic or body shop to assess the feasibility and potential challenges of such a project.

It's important to communicate and ensure that both parties are comfortable and consenting. You can initiate by expressing your desires verbally or through body language, and gauge the person's reactions to proceed further. Respect their boundaries and always prioritize mutual consent throughout the interaction.

The oil capacity of an 8.2 L Detroit Diesel engine can vary depending on the specific model and configuration. However, as a general guideline, the oil capacity for this engine is typically around 10-12 quarts. It is important to consult the owner's manual or contact the manufacturer for the exact oil capacity for your specific engine model. Overfilling or underfilling the oil can lead to engine damage, so it is crucial to ensure the correct oil level is maintained.

High flash point fuel oil refers to a type of oil that has a higher flash point compared to other fuels, meaning it is less likely to ignite at lower temperatures. This makes it safer to handle and store, reducing the risk of accidental fires or explosions. It is commonly used in applications where safety is a priority, such as in marine vessels or industrial settings.

One possible reason could be a faulty fuel pump. When warm, the fuel pump may not be able to maintain sufficient pressure to deliver fuel to the engine, causing starting issues. Another reason could be a problem with the ignition system, such as faulty spark plugs or ignition coils, that only becomes apparent when the engine is warm. It is recommended to have a mechanic diagnose the issue to properly identify and address the problem.

I think the Chevy 4.3L (262 ci) I could be wrong here

Largest displacement in truck use: GMC 478. 478 cubic inches. ~7.8L

Largest V6. EMD 645 was made in a small run in V6 for Victorian Railways Y class. 645 cubic inches per cylinder 2 stroke diesel.

The load carrying capacity of a 2001 Ford F350 Crew Cab can vary depending on the specific model, trim, and bed size. However, typically, the F350 Crew Cab has a payload capacity ranging from 3,000 to 5,000 pounds. It is recommended to consult the owner's manual or contact a Ford dealership for the exact payload capacity of a specific vehicle.

Hazard lights are used to alert other drivers of a potential hazard or emergency situation, such as a vehicle breakdown or accident. They are designed to increase visibility and indicate to others that caution should be exercised when approaching the vehicle.

There is 42 gallons of crude oil in a barrel. This oil is refined into several different products including gasoline, diese fuel, jet fuel, etc. Each 42-gallon barrel produces approximately 44.2 gallons of refined products. The approximately 5% increased represents a "processing gain." With that said, 52,000 gallons of diesel fuel would be produced from approximately 49,412 gallons of crude oil. The formula is: 42 gal crude oil yields 44.2 gal refined fuels

49412 gal crude oil yields 52000 gal diesel fuel crude oil * 1.05 = refined fuels

where crude oil is X,

X * 1.05 = 52000

X = 52000 / 1.05

X = 49412 gals of crude oil

No, diesel cannot melt tarmac or pavement. Diesel fuel does not burn at a high enough temperature to melt the materials used in the construction of roads. However, it can soften asphalt if left in contact with it for an extended period.

You can usually find wiring diagrams for Valley irrigation systems in the system manual provided by the manufacturer. If you are unable to locate it there, you can contact the manufacturer directly for assistance.

The Pressure Feedback EGR valve on a 1994 Mercury Topaz is typically located on or near the intake manifold. It is usually mounted on the side of the engine and connected to the exhaust gas recirculation system. You may need to consult the vehicle's service manual for the exact location.

There could be several reasons for this issue. It could be due to a problem with the fuel system, such as a clogged fuel filter or dirty fuel injectors. It could also be related to issues with the ignition system, such as faulty spark plugs or a failing ignition coil. If the problem persists, it is best to have the truck inspected by a mechanic to diagnose and address the issue.