answersLogoWhite

0

🚗

Late Model 1979-New Ford Mustangs

The 1979 model of Ford Mustang was based on the larger Fox platform that featured larger trunk and restyled interior to accommodate up to four people. It was available in three body styles – convertible, coupé and hatchback.

500 Questions

What Events happened on march 3?

User Avatar

Asked by Wiki User

Some notable events that happened on March 3 include the inauguration of President Thomas Jefferson in 1801, the completion of the Washington Monument in 1885, and the attack on the U.S. Capitol in 1974 by the radical group known as the Weather Underground.

What group battery for 2006 mustang V6?

User Avatar

Asked by Wiki User

I was looking at the 2006 Ford Mustang Owner Guide and it shows :

For the 4.0 liter V6 :

Motorcraft BXT-96R

Battery ( with High Electrical content ) Motorcraft BXT-40R

How do you remove the rack and pinion on a 2001 Saturn LS?

User Avatar

Asked by Wiki User

I originally asked this question but got the answer myself,by actually taking on the task myself,difficulty being a novice I would say,its about a 7 outta 10.Jack the car up and secure on jack stands with tires removed,use your club to secure the steering wheel so it does not move,remove both outer tie rod end,remove the 17mm and 14 mm bolts that hole the rack in place.Remove the plastic covering revealing the coupling,Use white out to mark the relation of the steering coupling to the pinion extention inside the car,then loosen the 10mm nut,the rack will fall out.twist and wiggle rack out.HINT: the rack is set in a tight place I removed the shock absorber fork,then turn the long pinion piece on the rack to shorten the rack on the drivers side,this makes the job easier.It took me an hour till i figured it out.Installation was more difficult,you need another person to line up the pinion extention to the steering coupling while its being installed and make sure the steering is bolted back on tightly to the pinion,I might have used words not professional but I guess you can pick up on what im talking about.Good luck to anyone who attempts this on there own...oh by the way mine was not a power rack and pinion.

How do you open a locked briefcase?

User Avatar

Asked by Wiki User

If our asking about a briefcase combination lock then you need to open the case and look for a small switch directly behind the lock, move and hold the switch to the left or right and set your combination to a number you can remember then move the switch back. Repeat this operation for the other lock.

How do you disable a factory installed alarm on a 1999 mercury cougar?

User Avatar

Asked by Wiki User

To disable a factory installed alarm on a 1999 Mercury Cougar, place the key in the ignition. Turn the key only halfway and let it sit in that position for 10 minutes before starting the vehicle.

What are the steps in replacing an ignition lock cylinder on a 1990 Cavalier?

User Avatar

Asked by Wiki User

Hate to tell you this, but you have to take the steering column apart. under the horn there's a bolt, but you need a special tool to put it back on... took me about a day and a half to fix it up on mine and now it just needs fixing again... so I just bought a club and hoped nobody found out it wouldn't lock.

How do you remove the rear taillight covers to change a burnt out bulb in a 1996 Nissan Pickup?

User Avatar

Asked by Wiki User

inside the truck box there are two bolts that hold the tail light in. Remove these bolts and the entire tail light assembly coems out. If you have a bed liner you will have to remove it first to get to the bolts

How do you change the windshield wipers on a 1996 mustang?

User Avatar

Asked by Wiki User

if you know where the wiper motor is there is 4 or 2 bolt holding it on. it will just be a bolt not and nuts. thanks

-------------------------------------

The above is completely incorrect.

First off their is 3 bolts holding it on.

But it is so much more complicated. you need to remove the access panel that leads to the cowl, you need to pry the ball joint appart. a screw driver works, then manuver the motor in a way you can take the bolt off from behind, (hopefully you dont have large hands) (hopefully you do have ratcheting wrenches, although it is possible with out one... just a pain) once that nut comes off, pop off the pieces its holding on, and the replacment is the opposite.... but dont expect the take out to be easy.

How to program a key to 2000 Nissan Maxima?

User Avatar

Asked by Wiki User

I may suggest you call the dealer. I asked when I bought my car about getting an extra key and they would have to order it for about $30 because of the electronic chip inside it. ** I found you could buy a 'chip' key on Ebay and have it programmed thru a locksmith for cheaper than at the dealer. Some of the higher end locksmiths have the computer to program the key. Also, when i checked at the dealer they wanted $90 for the key and $60 for the programming.

How do you Stop leaks on convertibles?

User Avatar

Asked by Wiki User

In order to stop leaks on a convertible it is important to find out the source of the leak. For example, if the leak is coming from the radiator the common fix for that is to have the radiator replaced. A certified mechanic would be able to locate the leak and provide a quote on the cost to fix the leak.

How do you get paid playing video games?

User Avatar

Asked by Wiki User

If I understand the question correctly, then usually yes.

A game company might have a contest in which the prize is appearing in their next video game, in which case the "payment" for appearing in the game would be appearing in the game.

However, celebrities who allow video games to use their name and likeness, and voice actors who provide the voices for the characters, would normally be paid.

How do you calculate horsepower?

User Avatar

Asked by Wiki User

1 horsepower is the power of 1 horse.

205 kw=276hp

How do you remove the headrest of a 1999 Chevrolet Venture?

User Avatar

Asked by Wiki User

There are small holes in the plastic housing at the bottom of the headrest. I can't remenber if they are on the door side or the console side of the plastic but if you insert an awl or I used a heavy duty paper clip into the hole it releases the catch and you can pull the headrest up.

Can a 13 year old make video games and get paid for it?

User Avatar

Asked by Wiki User

Yes, but you must be good enough and pass some exams. It is called Game Designing. Hope you make it (if you want).

How many cubic inches is 1550 cc?

User Avatar

Asked by Wiki User

The regular list of added flavors do not have sugar. However any of the swirls do contain sugar.

What cubic engine is equal to 5.3 liter?

User Avatar

Asked by Wiki User

If you assume that 1 liter = 61.01 cubic inches, then a 5.3 liter engine displaces 323.353 cubic inches.

What is 134 cubic inches equal to?

User Avatar

Asked by Wiki User

Fords 2.0 liter engines are 121/122 cubic inches

Fords 2.3 liter engine is 140 cubic inches

so around 2.2 liters for 134 cubic inches

How do you put upside down v on top of letters?

User Avatar

Asked by LuckyNumber07

press shift and while still pressing on shift press on the number 6

shift > 6 > ^

How many cubic inches equal 80 liters?

User Avatar

Asked by Wiki User

A liter is always a cubic measurement, so that adjective in unnecessary. 80 liters is 80 liters.

How many liters are displaced by a 325 inch engine?

User Avatar

Asked by Wiki User

around 5.3 liters for a 325 cubic inch engine

How many cubic inches in a ford 5.0 liter engine?

User Avatar

Asked by Wiki User

the 5.7 liter Chevy engine is a 350 cubic inch

How do you calculate liters to cubic inches?

User Avatar

Asked by Wiki User

1 liter = 61.0237441 cubic inches so multiply your liters by 61.0237441. Lets say you have 5 liters so:

5 x 61.0237441 = 305.1187205 or rounded 305 cubic inches