Gold is also another commonly used metal in wires and cables. It's usually coated around other metal strands because it's an inexpensive metal to use as the sole conductor. Gold is highly conductive and offers a superior level of electrical conductivity compared to copper, silver, and aluminum
generally for a condensing turbine the quantity for generating one MW electricity the steam quantity remains 8.5 t/h.
it will depend on the design of Turbine
in Our project it is 5.5 t/MW
Constant current LED drivers maintain a constant current and only the voltage can fluctuate according to the power required or needed. Whether, in constant voltage LED drivers maintain a constant voltage and only the current can fluctuate according to the power required or needed. For more details, visit marveldrivers. com now.
marveldrivers. com/product-detail-page/hvgc-320-2100b-constant-current-driver-by-mean-well-97604
The terminology used for a heating system that heats many rooms from one central location is commonly referred to as a "LPG Heating system". These systems utilize Liquefied Petroleum Gas (LPG) to provide warmth efficiently and effectively throughout multiple areas of a building or home from a centralized source.
Any element that is a metal.
YES!!!
Graphite is an allotrope of Carbon. Anyone carbon atom wants to make FOUR bonds with adjacent atoms. However, in graphite it only makes THREE bonds, leaving a 'loose' electron. This electron is able to move , hence conduction of electricity.
By comparison, Diamond is also an allotrope of Carbon. However, in this case all four bonds are made to adjacent atoms. This leaves no 'spare' electrons, so diamond does NOT conduct electricity.
A third allotrope of Carbon is the Buckminster Fullerene (Footballene). It is thought that the fullerene can act as a 'super conductor'.
submitting work for assessment or the completion of assignments or tests on time with the relevant information
In terms of electricity:
Grounding is putting a conductor from the circuit directly to earth. Guarding is putting some cover or barriers to live electrical wire, outlet or any conductor that are exposed to prevent physical contact that may result to electrical shock.
Tiny particles that make up electricity are called electrons. Electrons are negatively charged particles that orbit the nucleus of an atom. When these particles are in motion, they create an electric current that can be harnessed for various purposes.
In terms of injury or harm caused by electromagnetic signals, satellite receiver dishes do not cause any hazards. They are designed to gather and decode very weak signals and emit virtually no electromagnetic radiation.
The only danger is that of bumping yourself walking past them if they are mounted at low level.
since vapires and mosquitos are both drink blod it is supused that garlik were work for vampires to repil them
Well I really don't know.
Before stoves in the early times they would have something in the shape of almost a giant pot. Inside would be a fire and the people would put the food inside and let it cook.
Answer for USA, Canada and countries running a 60 Hz power supply service.
In order to plug your 3 wire stove into a 4 wire outlet, the easiest way to do so is to change the cord on the stove. This does not require cutting power to the outlet or anything like that.
Anyone who is going to be changing the power cable on any device knows that you need to unplug the cord first, eliminating the need to cut power to the outlet.
The difference between a 3 prong and 4 prong outlet is the ground wire. Both provide 240v power by supplying 2 120v wires (red and black). There is also a white wire, which will be your neutral wire.
The green wire is your ground, and should be bolted to the body of the stove. (Most appliances have a location for attaching the ground wire).
When connecting your wires, there should be 3 wire locations. You should connect one of the two hot wires (red or black), then your white wire in the middle, and then your other hot. The green will be your ground.
If LP orifices were not shipped with the appliance contact your dealer to order them. The conversion set should come with instructions for changing the orifices and for switching the regulator from natural to LP. Look for a small bag or envelope affixed to the back panel of the appliance and read the manual for conversion information pertaining to your unit.
The average electricity use of a restaurant in USA can be divided according to the climate zones. An average restaurant in Maryland consumes around 250 KbtU per square foot of electricity, while the restaurants in California uses around 126 KbTu per square foot of electricity.
Yes and No. Baking Soda (Sodium Bicarbonate) alone is not an "Electrolyte". Stick two electrodes into it and it does not conduct any electricity. But, when you mix it with water, the mixture becomes an Electrolyte solution allowing electrical conductivity between the electrodes. The more Baking Soda you add to the water, the more conductive it becomes. This is a popular additive for people constructing an HHO (Hydrogen, Hydrogen, Oxygen or Browns Gas) generating device. These devices are usually installed on automobiles to increase gas mileage. It is preferred for use as an Electrolyte in these devices because it is non corrosive, non acidic and generally leaves less debris in the solution than other electrolyte additives such as ordinary salt.
Obtain a steel rod about 5 feet long and secure a wooden handle on it. Tape one side of a cut electrical cord with plug to the top of the metal rod. Tape the other side closed. Poke the rod as far into the ground as possible. Plug the wire into a household outlet (or extension cord). The rod can be moved up and down or to another position. Us the wooden handle if you touch the rod. DO NOT touch the metal part of the rod.
Answer for USA, Canada and countries running a 60 Hz supply service.
Before an explanation of how to do this you should keep in mind that this is for a single receptacle only. If any other receptacles are on the same circuit they will also be changed to 120 volts.
The existing two pole breaker in the distribution panel that is to be replaced should not have a larger rating than a 15 or 20 amps. The wire size from that breaker will be #14 or #12 respectively. The final results of this project will leave you with a 15 amp 120 volt receptacle and one spare 15 amp breaker in the distribution panel.
That said, OK, any 240 volt outlet can be changed to 120 volt by removing the white wire from the 2 pole breaker and inserting it into the neutral bus bar. Remove the other wire (probably black) from the breaker. Remove the 2 pole breaker from the breaker panel. Install two single pole 15 amp breakers into the hole left by the 2 pole breaker. Leave both of these breakers turned off.
Connect the black wire that came off of the 2 pole breaker on to one of the new single pole 15 amp breakers. Re install the cover to the electrical panel, this end is finished. At the old 240 volt receptacle, remove the existing device and install a new 120 volt receptacle.
Materials can be purchased at local building supply store. Remember to take the electrical panel data with you so you have the information for the 2 new breakers. Once you have the new 120 volt receptacle installed, identify on the electrical panel door what the breaker is used for. Leave the unused breaker in the off position. Turn the new 15 amp breaker on. Turn the main breaker back on. Test the new receptacle with a lamp to make sure every thing is OK.
As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.
Before you do any work yourself,
on electrical circuits, equipment or appliances
always use a test meter to ensure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
The best way to do this is to take into a mechanic. They will have all the right parts to help you out with this.
get an electric scooter and bungee chord a cooler (ice chest) on it. I made one and it is fun!
That would be the idea of a "surround sound system". Unless you are talking about hooking up more than one speaker to the same exact port on the receiver. If so than yes, but you will not get true surround sound. For instance: You hook up two speakers to the same port, lets pick the front left channel, and then place one to the front left of the TV and the other to the back right you will get the front left's audio coming from behind you.
When electricity takes a new path that is shorter than normal or in the electrical trade it is know as, current taking the path of least resistance, it is known as a short circuit.
Check continuity