a square yard is 3' X 3', which is 9 sq ft.
20 X 80 ft is 1600 sq ft. Divide that figure by the number of sq ft in a sq yard and you will get your answer.
I've never actually seen a square yard, but doubtless they do exist, somewhere!
22 acres is equal to about 16.64 American football fields.
Assuming that you mean how many square feet is 6 feet x 8 feet, the answer is 48 sq. ft. (6x8=48)
If it's a rectangle, then the area = (12 x 7) = 84 square feet = 9 and 1/3 square yards
In international units of measure, it is exactly 5 square centimeters.
No. It's 32 square feet. You've got the number and the unit wrong,
but otherwise everything is OK.
The answer depends on the units used for the measurements given in the question.
The area of a room with a perimeter of 36 feet is: 81 square feet.
The meter is equal to about 39.37 inches.
The value 5' 4" is equal to 64 inches, so 64 divided by 39.37 is 1.6256 meters
However, height and other human measurements are usually expressed in centimeters.
5 feet, 4 inches = 162.56 cm
Multiply the two dimensions to get the area. The calculation will give you 8 square feet.
This question cannot be answered sensibly. A square metre is a measure of area, with dimensions [L2]. A metre is a measure of distance, with dimensions [L]. Basic dimensional analysis teaches that in most cases you cannot convert between measures with different dimensions without additional information.
determine the estimated cost of a warehouse with the following parameters:
Building length—210 feet
Number of bays on the length side of the building—7 each
Building width—120 feet
Number of bays on the width of the building—4 each
Wall height above grade—22 feet
Depth to top of footing—12 inches
Floor slab—6 inches thick with wire mesh
Number of roof hatches—2 each
Number of personnel doors—4 each
Number of 14-foot-wide by 14-foot-high overhead doors—14 each
Number of 4-foot by 4-foot skylights—28 each
Fire sprinklers are not required
Separate male and female bathrooms are required
Depends on the size of the bricks.
Divide by '9' . since there are 9 sq.ft. in 1 sq. yd.
Hence 1224 / 9 = 136 sq.yds.
You misunderstand.
'Inches' is a linear measure.
'Square inches' is a measure of area.
So you are asking ' how many lines in a square?. Four lines make up the perimeter of a square.
1square feet is a 0.0929m2
105 square feet is a x m2
x=105*0.0929/1
x=9.7545m
Remember there are 12 inches in 1 ft (linear)
So 12 inches x 12 inches = 144 sq. ins in 1 ft x 1 ft = 1 sq.ft. (area)
So in 1 sq.ft. there 144 sq. inches.
So multiply 1008 sq.ft. by 144 sq .inches = 145152 sq.ins,
This question cannot be answered sensibly. A cubic foot is a measure of volume, with dimensions [L3]. An inch is a measure of distance, with dimensions [L]. Basic dimensional analysis teaches that in most cases you cannot convert between measures with different dimensions without additional information.
What is the minimum cross sectional area of the flue for a 14 ft tall fireplace with an opening 20 in x 24 in?
My bedroom is 18 ft across and 21 long .
What is the entire square footage of the room? I would like to replace the carpet and put new carpet and snap-on linoleum flooring tile... Any suggestions ?The room is gray and white?.
Thank you, have a blessed day 😊🙏