Tool and Die Makers
All questions concerning tool makers, die makers, mold makers and tool fitters and the work they do including the tools and equipment they use (machines such as lathes, mills, shapers, grinders, saws), as well as the necessary education and training to become one can be found here.
Total questions 900
Follow
ID1795879206
added Why use forged metal parts over parts made from bar stock to Tool and Die Makers 25 May 2012 18:01
ID0995796697
wrote the first answer to How much load could a M6 screw can carry 25 May 2012 05:03
Edits
Keats
Ganderton
Organization
Jdgallatin
Keats
Questions
JdgallatinLathe machines can perform most widely used operations in Engineering. some of them are: Turning i.e workpiece will rotate...
Popularity: 116 • Tools: Recategorize
Low carbon content <0.6% results in lath structure as opposed to plate or needle structure for high carbon content >0.6%
Popularity: 92 • Tools: Recategorize
Compound Slide, head stock tail stock tool post the spindle
Popularity: 57 • Tools: Recategorize
A quote from the related link is "Most lathe centers have a tapered point with a 60° included angle to fit workpiece holes with...
Popularity: 55 • Tools: Recategorize
Faceplate's are generally a circular metal plate that can be fixed to a lathe for project holding purposes.
Popularity: 52 • Tools: Recategorize
For making long, round things or sometimes short, round things. In either case, it helps you make things round. ;)Yes this is...
Popularity: 46 • Tools: Recategorize
so it wont over heat (its coolant and its not supposed to be oil... coolant is milky white) that is all i know from a shop
Popularity: 32 • Tools: Recategorize
a laithe works by a rotating jaw with ur work in the chuck and u can use many laithe tools to cut difrent things off of your work...
Popularity: 24 • Tools: Recategorize
A lathe chuck is a device on the driven spindle on the head (headstock) of the machine that holds the workpiece. It grips and...
Popularity: 22 • Tools: Recategorize
Obviously it would depend on the stainless grade because stainless is an alloy, so the speed rate would differ slightly depending...
Popularity: 21 • Tools: Recategorize
Tradesource(3105 W. Marshall St.), Goodwill of Central VA, American Staffing(W. Broad), FCG financial(Hull St.)
Popularity: 18 • Tools: Recategorize
Popularity: 17 • Tools: Recategorize • Needs Answer
Some major sources of lathe vibration are as follows: 1.) The stock you are turning is not centered properly, or has a lopsided...
Popularity: 17 • Tools: Recategorize
swage
Popularity: 16 • Tools: Recategorize
They are just another cheap Swiss army knock-off company like everybody else. The price may be low but so is the quality. If you...
Popularity: 16 • Tools: Recategorize
I certainly don't think that is true. In practice it is easier to machine anything that has an even number of sides, since the...
Popularity: 15 • Tools: Recategorize
230V/1Ph/50Hz 1HP (0.75 kW)Motor Capacitor start induction motor ( single phase)
Popularity: 14 • Tools: Recategorize
Two categories; Woodworking lathes, Metalworking lathes. Sub-categories; Woodworking; Spindle turning, Scrolling, Bowl turning. ...
Popularity: 14 • Tools: Recategorize
I don't know what your asking, so, a magnetic chuck screws on to the lathe spindle head, the magnetic chuck in its self has a...
Popularity: 14 • Tools: Recategorize
You might try these people they are very helpful. www.legacywoodworking.com or you can e-mail them at:<...
Popularity: 13 • Tools: Recategorize
A lathe (pronounced /ˈleɪð/) is a machine tool which spins a block of material to perform various operations such as cutting,...
Popularity: 12 • Tools: Recategorize
We use the lathe machine for facing, knurling, grooving, etc... n gen we use all these processes after foundry and casting of a...
Popularity: 10 • Tools: Recategorize
I Dont exactly know but got somthing to do with splash lubrication.
Popularity: 10 • Tools: Recategorize
If you can't find the manufacture online you can check the motor for (amps, watts, voltage, and horsepower), and look for a...
Popularity: 10 • Tools: Recategorize
Dear Sir/ Madam,With a great pleasure I am going to inform you that I request a quotation for an extension to my property,...
Popularity: 9 • Tools: Recategorize
That would be the radius of the largest cylinder that can be turned in the lathe.
Popularity: 9 • Tools: Recategorize
lathe 113.228160 my email is bellscolly@comcast.net email me if you want me to make a copy of the owners manual and send it to...
Popularity: 8 • Tools: Recategorize
In lath machine mostly operation we can perfom.
Popularity: 8 • Tools: Recategorize
Single phase induction motor ( usually capacitor- start type)
Popularity: 7 • Tools: Recategorize
step turning is basically an operation performed on lathe machine to reduce diameter of a cylindrical work piece
Popularity: 7 • Tools: Recategorize
They are essentially the same machine. Capstan is British usage, Turret, US. One old and still technically correct usage of...
Popularity: 6 • Tools: Recategorize
Lowes sells 1-1/2" wide lath strips. They also can be ripped from 2x4 material, 3/16" thick. Jack...
Popularity: 6 • Tools: Recategorize
Metalworking lathes: Center lathe / Bench Lathe / Engine Lathe CNC Lathe Capstan and Turret Lathe Toolroom Lathe Swiss-Style...
Popularity: 6 • Tools: Recategorize
Your hair should be closed. The closing time Tuesday to wrench off the workpiece. Use safety glasses. Wear appropriate work...
Popularity: 5 • Tools: Recategorize
A lathe onto which a system of computer numeric control (CNC) is attached is a computerized lathe. You'll have an input source...
Popularity: 5 • Tools: Recategorize
Scraping on bed and slide ways provide a high measure of accuracy. To scrape a surface to a precise measure, it is covered with a...
Popularity: 5 • Tools: Recategorize
Cast iron is used as the "material of choice" for many machinery housings or bases because it is extremely stable in its...
Popularity: 5 • Tools: Recategorize
That crosspoint, with side fillets, was designed by the Phillips company, the company of Henry F. Phillips, the founder. The...
Popularity: 4 • Tools: Recategorize
There are a number of different types of lathe. We usually separate them out by whether they are for wood or metal (and other...
Popularity: 3 • Tools: Recategorize
A "tool" and "die" maker builds the precision items necessary to turn raw materials into usable parts for many different things....
Popularity: 3 • Tools: Recategorize
No. The metal lath replaces the wood furring.
Popularity: 3 • Tools: Recategorize
A lathe machine is used for machining most of the cylindrical jobs llike shafts, axle , round pins and bush. The operations that...
Popularity: 3 • Tools: Recategorize
The chuck has three, sometimes four "jaws" that grip the piece to be turned.On a power drill, the chuck holds the bit in place...
Popularity: 3 • Tools: Recategorize
It is definitely Tool and Die.
Popularity: 3 • Tools: Recategorize
the size of a lathe can be described by either of the following ways. 1.DISTANCE BETWEEN THE TWO SPINDLES. 2.SWING DIAMETER.ITS...
Popularity: 3 • Tools: Recategorize
They're called turners.
Popularity: 3 • Tools: Recategorize
There are many different types of Lathe, the King of all machine tools- as there are many types of Organs ( musical...
Popularity: 3 • Tools: Recategorize
A woodturner is a woodworker who makes one, or both, of two things: vessels or spindles. Vessels can be bowls, dishes, submarine...
Popularity: 3 • Tools: Recategorize
Lathe specifications· Distance between centers· Swing over the bed· Swing over the cross slide· Horse power of the motor·...
Popularity: 3 • Tools: Recategorize
Swiss-style lathes are used for machining components requiring extreme accuracy. some of these lathes are capable of machining to...
Popularity: 3 • Tools: Recategorize
A dead center is removed by turning the tail stock spindle in a counter-clockwise direction until if feels like it comes to a...
Popularity: 3 • Tools: Recategorize
Turning point in the final product is assembled. Milling machine to create a parallel level. Slot. Gear. Hole. Angular surface.
Popularity: 3 • Tools: Recategorize
The apron on a lathe is suspended from the saddle. It houses a gearbox connecting the carriage hand wheel to the rack enabling...
Popularity: 3 • Tools: Recategorize
Most of the metal lathe is made of cast iron.
Popularity: 3 • Tools: Recategorize
Lathe operation.Milling operation is done with its axis of rotation.The final product is always turning point in the round.
Popularity: 3 • Tools: Recategorize
The lath is a machine used to create cylindrical shapes using steel and plastic.
Popularity: 3 • Tools: Recategorize
the equipment needed for investment casting of gas turbine buckets and blades are i dont know you know
Popularity: 3 • Tools: Recategorize
When Pig Iron is melted and recooled it is called Cast Iron
Popularity: 2 • Tools: Recategorize
The only sure method is to have the appropriate internal (female) thread eg. a nut available and to try this on the cut thread....
Popularity: 2 • Tools: Recategorize
Cause CNC tool holder is mechanical system, driven by electric motor(electronics), which is controlled by computer (software). So...
Popularity: 2 • Tools: Recategorize
I don't think after completion you will be awarded a diploma not a degree.
Popularity: 2 • Tools: Recategorize
A cnc lathe can manufacture nearly anything cylindrical. Some even have attachments to do other types of work in the machine as...
Popularity: 2 • Tools: Recategorize
from what I understand its the same idea the way a crank shaft turns on a car, the idea is to remove material in the form.
Popularity: 2 • Tools: Recategorize
The bed of a NC lathe is at an angle just to ensure swarf slides to the bottom of the machine for collection. They are referred...
Popularity: 2 • Tools: Recategorize
Primitive forms, according to Donnelly, date to Atlantis, or classic Greek times- these were entirely manual, and had pedal...
Popularity: 2 • Tools: Recategorize
The package is part of the workpiece.
Popularity: 2 • Tools: Recategorize
Aha, look at Old Woodworking Machines web site at OWWM - Craftsman - Publication Reprints - 113.228000 Craftsman 12-inch Wood...
Popularity: 2 • Tools: Recategorize
All lathes could be considered "centre lathes." You turn "between centers." There's also a tool called a "machining center,"...
Popularity: 2 • Tools: Recategorize
(Please note - the folllowing explanation is for wood latt NOT lathe) A piece of wood, fairly flexible, usually about two inches...
Popularity: 2 • Tools: Recategorize
I made mid 50k last few years in Arizona with moderate overtime
Popularity: 2 • Tools: Recategorize
There are two types of VTLs , one is ram type and another is turret type. question asked is slightly confusing. He mean to say...
Popularity: 2 • Tools: Recategorize
what are the classification of a lathe machine
Popularity: 2 • Tools: Recategorize
It is a machine tool which spins a block of material to perform various operations such as cutting, sanding, knurling, drilling,...
Popularity: 2 • Tools: Recategorize
The type of motor used depends on the size of the lathe. Small "hobby" lathes use small fractional (1/8, 1/4...) horsepower ac...
Popularity: 2 • Tools: Recategorize
Metal lathes can be used for a variety of different purposes. One use of a metal lathe would be to machine brake rotors and drums...
Popularity: 2 • Tools: Recategorize
Any apron that is not securely tied in back of the wearer, or that has a torn or frayed edge, presents a risk to the wearer of...
Popularity: 2 • Tools: Recategorize
All gearboxes work the same way: there is a gear on the motor, a gear on the thing you're trying to drive, and sometimes a set of...
Popularity: 2 • Tools: Recategorize
It's a machine for threading and it's called Lathe Machine
Popularity: 2 • Tools: Recategorize
Would that be like a Seneca Falls lathe, with drive belts comming down from overhead?
Popularity: 2 • Tools: Recategorize
Open the chuck all the way and look down inside it, you'll probably see a screw you'll need to remove. If it's an older model,...
Popularity: 2 • Tools: Recategorize
A turret lathe has six-usual tools arranged in the order of use on a rotating turret which is cycled by a large wheel or...
Popularity: 2 • Tools: Recategorize
The accuracy of a lathe depends on the following: Skill of the machinist Wear on the slides and carriages Alignment of both head...
Popularity: 2 • Tools: Recategorize
I'd have to see the two lathes to tell you, but there are four main reasons a turner replaces his lathe: the new one vibrates...
Popularity: 2 • Tools: Recategorize
it is about 3 or 4 feet long but its not wooden its metal
Popularity: 2 • Tools: Recategorize
acme thread is used in lathe lead screw
Popularity: 2 • Tools: Recategorize
An "operation" is one step in a manufacturing process. Typically, there are a number of operations required to manufacture any...
Popularity: 2 • Tools: Recategorize
Oneway makes them. What you must do is determine the diameter of the spindle and the number of threads per inch it has. Once you...
Popularity: 2 • Tools: Recategorize
by not being a douche? its one of easiest to use!
Popularity: 2 • Tools: Recategorize
There is no way to support the sheet metal in a lathe do perform any operations on it.
Popularity: 2 • Tools: Recategorize
$22 to $30 / hour in Ontario. Not as a management position but may lead other toolmakers or apprentices. Wages as of 2010, have...
Popularity: 1 • Tools: Recategorize
