Se encuentra encima del tanque de gasolina, en el lado del pasajero
P0601 is PCM internal processor failure.
The PCM needs replaced.
P0601 is PCM internal processor failure.
The PCM needs replaced.
First remove the four 10 MM bolts holding the trans cooler and drop it down. Support it by attaching one bolt to the lower hole on the cooler frame. This will keep the weight off the lines. This takes two min. and allows easy removal of the elect. lines. Then remove the four bolts on each bumper. The bolts are 13MM and 17MM. You will need a ratchet, sockets, extension and a 13MM open end wrench. If you remove the rear bumpers, you should replace the rear pan with one of the aftermarket ones otherwise you will have big holes staring at the people behind you. Go to prowleronline.com and check the vendors for a couple of options. Maybe you are removeing them to paint and reinstall. Look at this link for some options .. Mine is the 7th post down. http://www.prowleronline.com/ubb/Forum1/HTML/014949.html Hope this helps. You can find me at prowleronline.com as BradleyG.. If you have more questions, join the POA and ask away. Great people and happy to help fellow Prowler owners.
Last year made was 2002. The last 300 off the line were painted Candy Red and are the most sought after.
courtesy of www.TheProwlerStore.com
Simply pull the handle out of the trans fuild filler port in the engine compartment and fill until the dipstick reads full. courtesy of www.TheProwlerStore.com
1997 and then again from 1999 to 2002.
See complete details at www.TheProwlerStore.com/Prowler_Info_1.htm
The Plymouth Prowler is generally considered an automatic, however it does have a device on the stick shifter that will allow you to overide and shift manually. courtesy of www.TheProwlerStore.com