It really sounds like a kill switch or safety interlock issue.
When the kill switch is malfunctioning the coil is grounded and will not generate a spark.
Do a continuity test on the switch contacts or wires, if there is continuity with the switch in the run position the switch is not functioning, or the wire has gone to ground somewhere.
check the fuel filters
Have you checked If copper plate main fusible link in underhood ok ? Defective ignition switch is another posibility.
Clutch pedal switch or deteriated clutch pedal switch pad.
its could be a flasher relay. or the turn signal switch in the steering column
The alarm switch system is not working right. This could be a door switch, or a wiring problem. the system needs to be checked one switch at a time, then the wiring is checked next.
it could be multiple reasons: dead battery, bad starter, bad ignition switch, bad alternator, loose wire, locked up motor, or a bad connection i would have it checked out.
I cant really answer this correctly without knowing which model it is. Is it a Rincon? Rancher? Rubicon? Foreman? If I knew then I could answer your question.
There could be an issue with your starter or the starter solenoid. Have it checked, but either part might need to be replaced.
Could be a burnt bulb. Could be a short in the wiring. Could be a bad switch.
It COULD mean a blown head gasket. Have it checked out.
install a new starter on and some time when i turn the switch on it will not start up what could it be
Could be a bad ignition switch