0
How an iron nail can be made into a magnet using stroke method?
Wiki User
∙ 12y ago
You stroke it with a magnet.That's how you turn a nail into a magnet.
Wiki User
∙ 12y ago
Anonymous
You can by using single touch method
Add your answer:
Earn +20 pts
How to make a magnet?
Making a magnet is very simple. We need : 1. an iron nail or any other long iron object 2. a magnet METHOD: Rub the magnet on the iron nail in one direction. Then lift it and repeat the action . Repeat this series of action 30-50 times. the iron object will turn into a magnet. But it will not become a strong magnet CAUTION: While rubbing the magnet with the iron object, we need to rub it with the same pole on one side
What are magnits?
magnets is something that sticks to iron a magnet has iron in it so the magnet sticks ontot to other objects
How do you separate dust and iron dust?
Simple. With a magnet. The iron dust will simply be attracted to the magnet. To collect the iron dust neatly, get a plastic sandwich bag or a small plastic baggie, put the magnet inside, use it to collect the iron dust, then turn the bag inside-out and remove the magnet.
What object that attracts iron?
none of them. iron can be magnetised but the material itself is not magnetic
How can iron become a magnet?
dum but
What is a stroke method of making magnet?
First, grab an iron nail. Next, grab a bar magnet. Stroke the iron nail with the bar magnet at least 20 times. You can increase the strength by stroking it more. Now, bring the iron nail near some paper clips. It attracts them! Science is cool!
How you can make an iron into a magnet?
Use the magnet to stroke the iron nail many times and you try to attract something
Which method is appropriate for separating a mixture of iron and aluminum?
You could do this using a magnet, Iron filings are attracted to a magnet, aluminium filings are not.Hint: magnetism, investigate the relative magnetic properties of the metals.Iron is a ferrous material, and aluminum is non-ferrous. A magnet would separate the two materials as the iron would be attracted to the magnet while the aluminum filings would not. The term ferrous basically refers to any material which contains iron.
How do you magnetise a magnetic material?
you can only magnetize something that contains iron. if what you have contains iron, then you rub a magnet on it
Is making iron into a magnet a physical change?
To make an iron bar into a magnet you need to get a bar magnet and stroke the iron one way when you get to the end of iron take the magnet off and jump it back to the start and stroke repeat this several times and your bar will soon become magnetic. This is only temporary, therefore the iron will become normal after the magnetic field rubs off. This means that making iron into a magnet is indeed a physical change.
How do you separate iron nails and salt?
One way to separate iron nails and salt is by using a magnet. Since iron is magnetic, you can move a magnet over the mixture and the iron nails will be attracted to the magnet, allowing you to separate them from the salt. Another method is to dissolve the mixture in water, as salt dissolves readily, and then use filtration to separate the solid iron nails from the dissolved salt solution.
What method to be use to separate powdered iron and powdered aluminum?
Iron is a magnetic metal, aluminium is not.So, a simple method is to use a magnet for this separation.Magnetic separation is frequently used to extract iron from wastes.
Separation method for sulfur sand and iron fillings?
use a magnet for separating it the iron fillings will go to the magnet and the sulfer will stay on the ground :)
How do you find out if iron is a metal?
One method is to use a magnet. If the metal is iron, the magnet will be attracted.
How do you make temporary magnets?
There are basically two ways to make temporary magnets. They arethe stroke method and the electrical method.The Stroke Method:Take a piece of metal like iron and stroke the magnet across it in a certaindirection I.e. in a straight line. Keep stroking the magnet across the iron piecein the same direction for a few more times. The piece will be slightly magnetized.The Electrical Method:Wrap an iron bar with a coil, a conducting wire of copper, and connect the ends of the wire to the terminals of a battery. Electricity will pass through the bar which will result in the formation of an electromagnet.
Process of separating iron fillings from a sulfur powder using a magnet?
If you put the magnet near the iron fillings, they will be drawn out by the magnetic pull of the magnet.
Why does using a magnet to separate iron filling from sawdust work?
Iron is magnetic; so, the iron filling is pulled/ is attracted to the magnet. The sawdust is not magnetic, so it will stay where it is, and will eventually be separated from the iron and the magnet.
