0
1st you need to know where the leak is. The only time a copper fitting or brass fitting will fix a leak is in the watersupply connection.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you fix Memory Leak on Windows?
i had the same problem just go buy some duck tape and tape it up it should stop leaking
Why would a Ford Focus engine sound so loud but smooth and why would it idle so hard?
Check exhaust system for a leak Well, if it's a 2.0 SOHC engine commonly found in the 2000-2004 LX models, it's probably the EGR inlet tube. It looks like a copper tube running out of the front side of the engine, and hooks up to the exhaust manifold with a rectangular bracket held on by two bolts. The engine moves a bit under torque, and this part doesn't. It eventually develops a leak where the tube meets the bracket. You can probably fix it temporarily using JB Weld but it will eventually break again...
What does a small leak will sink a great ship men?
It means that even minor problems, left unfixed, can become greater problems. A small leak cannot sink a great ship, if the sailors are aware of what's going on. People walk around in the lower levels of a ship; if there's water leaking in, the sailors are trained to report this to the bridge, and to repair the damage. Small leaks are easy to fix - once you discover them.
Is there a good method to fix a hole in the main drain pipe from the toilet or should it always be replaced?
They sell rubber sleeves that are used to join PVC and galvenized lined. Putting this over the leak and placing the hose clamp over the damaged are should solve your problem for now.
Was the song fix you ever on Grey's Anatomy?
fix you
How do you fix a newly installed dishwasher leak?
With a manufacturers leak repair kit normally supplied as an add on device
How do you fix windshield wiper air line leak on a 1986 freightliner truck?
Find the leak and repair it with a compression or push-in fitting.
How do you fix a slight leak going into the valve from the copper pipe you noticed when removing a radiator?
if it is a slow drip or sepage, it will make, @ particles in the water will fix it, if it is a steady drip then you will have to take it apart and wrap the pipe fitting with teflon tape, or use a pipe sealer on the threads,
How do you fix a leak in the brake line in a 2001 Kia Optima?
it depends if it is a metal line or rubber lines , if it is at a fitting or at the master cylinder or abs i can help you find these if you cant locate the leak
Will plumber's putty seal a spa fitting leak?
Only temporarily. If you are able to get it sealled, depending on the nature of the leak, you may get up to a month before it will reopen. The correct way to fix your leak depends upon where exactly the leak is, how large the leak is, and what type of surface your pool is made of.
How do you paint over verdigris on copper pipes?
You shouldn't do this. Where verdigris is thickest is where your copper pipe is going to soon have a pinhole leak. If you paint it, it's much harder to fix in emergency.
How can I fix a cracked copper pipe?
If it is leaking at a fitting, it is either a bad flare or it isn't tight enough. Gas or flare fittings should be put together dry, Do no use pipe dope because this can cause a leak between the mating surfaces. If it is in the line itself, either replace the line or cut it, flare the ends and put a fitting in.
How do you fix a coolant a leak in the radiator where the oil line enters on a 1997 Chevy z71 with a 5.7 L. engine?
The only way to fix that problem is to buy a new radiator. Your old one has cracked around the fitting.
I have a waterline leak at my home from the street to my home .....can I get a grant to fix this leak?
I have a waterline leak at my home from the street to my home....can I get a grant to fix this leak?
How do you fix a dishwasher?
call a repair man
How do you fix a leak instantly?
What kind of leak and where is it?
How do you fix leaking ION banjo fittings?
Replace the fitting, they are cheap plastic, once the housing cracks and is leaking you just need to replace the whole thing. If the leak is coming from the threading though you can probably fix it with some teflon tape, just dont tighten down on the fitting too hard or you will have other problems
