Want this question answered?
For a comprehensive database of active frequencies in your area, and a lot of other useful scanning info, take a look at the link below.
When you set up a Uniden Bearcat BC148XLT base scanner, you must program the frequencies you want to scan based on your area's frequencies. You do not need to include weather frequencies, because the BC148XLT includes weather frequencies pre-programmed in the base. You can add frequencies to your scanner in minutes, allowing you to customize the frequencies you scan.Press "Manual" to stop the scanning process. Press the number for the channel you want to program using the keypad on the scanner base. Press "Manual" after the channel number.Enter the frequency, including the decimals, using the buttons on the keypad.Press "E" to store the frequency.
a program is called a program. a set of instructions is called a manual.
Try programing in 000.000, if that does not work then you can just lock the frequency out or program over it.
easy to program
For a comprehensive database of active frequencies in your area, along with a lot of other useful scanning information, visit: www.RadioReference.com
For a comprehensive database of active frequencies and systems in your area, and a lot of other useful scanning information, visit the related link below.
See the related link below for Jasper County, Texas.
The population of Uniden is 2,009.
If this question is in reference to scanner frequencies, see related links. If the question is about something else, please ask a more specific question.
Uniden's motto is 'A World without wires'.
Uniden was created on 1966-02-07.