0
If the oil level is above full that is a bad sign. If your car is putting out white smoke. A white foamy substance on the underside of the oil fill cap. Air bubbles escaping from the radiator. All these are symptoms of coolant in the combustion chamber and more than likely you have a blown head gasket or cracked head.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you mix 2 cycle engine oil?
Look on the oil container and the engine that you want to use it in. The engine will tell you what ratio to mix the oil and gas at. The container of oil will tell you what amount of gas should be mixed with it. I have found that the best way is to put the oil into an approved gas can and then add the gas to it. This helps to mix the oil better.
Why Water mix with engine oil in diesel engine?
Blown head gasket
What will a bad intake gasket do?
It can allow water to mix with the engine oil and destroy the engine.
Does engine light turn on when water is getting in your oil?
rx8 light does not come on when water and oil mix. if the oil and water mix is up the dipstick then this is norm more so on short journeys
How do water and oil mix in a water cooled engine?
They do not mix, the oil and water circulate in separate closed systems within the engine block. The water is pumped through the radiator, then through special channels in the engine in order to cool it by means of heat transfer. The the oil is pumped from the oil pan to the head, pistons, crank, and other essential engine components. If the water and oil in your engine do happen to mix it's typically a problem due to a blown head gasket, or cracked or warped cylinder head. Failure to repair this condition can result in engine failure.
Can you mix water with oil?
No we cannot mix water with oil.
What happen to the engine when it start allowing water to mix with the oil?
You have a blown head gasket.
Is a pro-mix 4-cycle premium engine oil fine for my snowblower which you do not mix oil and gas...I can't tell if its just the brand name or if I do have to mix it?
No it is 4 cycle oil, 2 cycles is the only oil you mix with gas for 2 cycle engines. They may be referring to a syn/ conventional oil mix that they have preformed to improve their oil. It will work fine in your 4 cycle engine as long as it is the correct weight for your engine. As long as it is like 10w30 you should be good to go.
What is the definition between the oil mix to water?
Oil will not mix with water.
Why is there Oil in water on 1997 RM125?
There will be oil in the water on a 1997 RM125 if the head gasket is leaking. It allows oil and water to freely mix across the cylinder head and engine block.
How can you tell if there is water in my engine oil?
if the dipstick has white foamy stuff on it
In an oil spill why does the oil not mix with the sea water?
Oil does not mix with water, not even salty sea water.
