Inside trunk, remove two black plastic nuts holding carpet liner in place on side where bulb is burnt out. Pull back carpet. Use a flat screwdriver to pop out the wiring. Remove three nuts using a small open-ended socket or pliers. Pop out entire tail light assembly. Locate bulb to be replaced. Rotate 1/4 turn to remove from socket. Replace bulb and repeat in reverse order to reinstall.
You need to SWAP THEM!
Yes
There are three black caps that screw off in the trunk behind the brake light itself unscrew them and the assembly comes out then change bulb
faulty brake light switch (on pedal)
Brake lights could stay on in a 1999 Dodge Stratus because of a short in the wiring. If the headlamps are off and the brake lights are still on, check the wiring for the brake lights that is inside the trunk. Sometimes cargo in the trunk can interfere with the lights.
under the carpet in the trunk
Light amber color when new. Will turn dark brown with age.
Possibly bad brake light switch, or broken/disconnected wiring.
tail lights circuit
Hey Laura==The whole tail light housing has to come off and the bulbs just come out from the rear. GoodluckJoe
You can access the middle brake light from the inside of your 2000 Dodge Neon cargo compartment. Remove the brake light wiring harness. Remove the brake light retaining bolts. Reverse the process to install the new brake light.
From th einside of the trunk there are three plastic wing nuts that hve to be removed in order to remove the taillight. Once the taillight is out You can remove the bulb by turning it Counter clockwise.