Um, try this site to know: http://www.engineeringtoolbox.com/chilled-water-d_955.html
.
heat pumpEvery system that creates a chilled water, moves heat. An absorption system uses heat energy to remove heat from water and ice cream!.
of instruments
The cooling effectiveness of the chilled water system depends on the water flow. Thus the water flow rate, as well as the temperature of the water, need to be monitored and adjusted to provide the chilling effect.
This link has schematic diagrams that's should help you draw a chilled water system http://www.jmpco.com/schemat.htm
no.
To strain waste particles in chilled water
PRIMARY CHILLED WATER PUMPS ARE SELECTED TO FULFILL THE REQUIREMENTS OF THE CHILLER WHERE AS SECONADRY CHILLED WATER PUMPS TO SUPPLY CHILLED WATER TO THE LOAD. FOR EXAMPLE TO THE FAN COIL UNITS & AIR HANDELING UNITS. IN NORMAL PRACTICE THE SECONDARY CHILLED WATER PUMPS ARE APPLIED WITH VARIABLE FREQUENCY (SPEED) DRIVE WHILE PRIMARY WITH CONSTANT SPEED, IN THIS ALSO PRIMARY CHILLED WATER PUMPS CAN BE USED WITH VFD SYSTEM. AIJAZ AHMED JALBANI MECHANICAL ESTIMATION ENGINEER EMIRATES TECHNICAL & THERMAL SYSTEMS L.L.C
just multiply pump capacity by 3
You can observe water droplets on the surface of a chilled bottle because the temperature of the atmosphere is a different temperature to that of the temperature in the chilled bottle.
Chiller uses chilled water while vrv uses refrigerant directly
Chilled water flow in gpm x difference in chilled water temperature/24
There are a lot but some of them are * Fan * Coils * hot water piping * chilled water or refrigerant piping * Pumps * Distribution system(ductwork)