Answers.com > Wiki Answers > Categories > Home & Garden > Home Improvement > Heating Ventilating and Air Conditioning > How do I add register to hot air furnace duct in my basement?

How do I add register to hot air furnace duct in my basement?

Answer:

Buy the register, trace out the the hole for the part of it that will penetrate the duct, cut the hole and install the register then screw it in.

First answer by H2045. Last edit by H2045. Contributor trust: 98 [recommend contributor ]. Question popularity: 1 [recommend question].

[report abuse]

Can you answer these Heating Ventilating and Air Conditioning questions?

	What is the average cost of a service call for a home air conditioning problem?	Answer it!
	How do you put a portable air conditioner in a crank out window?	Answer it!
	What does a contactor does to the central air?	Answer it!
	What size fuse on a 5 ton unit?	Answer it!
	Why does the process of heating and cooling of wine still has a major effect on the US?	Answer it!

What is the function of hot air in a blast furnace?
to burn coke that will burn the raw material
How do you change the filters on a hot air furnace?
Furnace should have an on off switch near it. Turn it off. Turn wall thermostat off.Air filter screens are flat and wide. Typically they slide into the side of your furnace. Some slide in the inside...
Why doesn't hot air come out of register?
It could be a lot of things but let's first eliminate the obvious from easy to harder: Is the thermostat set to heat and above the current room temperature? Is it set to fan or Auto? Do you have gas...
How hot is the air in a hot air balloon?
The internal temperature will depend on various factors such as the load on the balloon, it's size, and the ambient air temperature. The loading of the balloon will generally be arranged such that...
Why is hot air blasted into a blast furnace?
Hot air is blasted into the blast furnace to burn the coke (a cheap form of carbon) added to form carbon dioxide.