Contour maps have lines along points at the same height or elevation. The contours are usually drawn at regular intervals, such as every 10 or 50m of height change.
Where contour lines are very close on a map, this shows that the height is changing a great deal over a short horizontal distance, and therefore the gradient is steep.
Areas of shallow gradient will have contour lines that are a long way apart, showing that points that are a set distance apart in height are a large distance apart horizontally.
They show the relief of an area. They will have height values attached to them. The distance between contour lines gives an impression of gradient. The closer they are together, the steeper the slope.
A one meter contour interval would be more likely to show a shallow1.5-meter-deep depression in the ground than a five meter contour interval, because itshows more frequent changes in elevation.
They show a narrow area
if someone were to make a topographic map they would mostlikly have a bunch a contour lines realy close together because the closer they are together the more steep it is.so i guess they would make close contour lines then make a drop off
Contour lines show elevation.
Contour lines show levels of elevation, where there are hills and valleys on a map
Maps can show elevation with contour lines
Contour lines show elevation.
Most people are probably familiar with contour lines found on topographic maps, which show elevation. Contour lines can also show weather and climate data, such as temperatures and humidity. Less common, bathymetry (the depth of water bodies) can also be shown using contours.
that the elevation of the area varies
yes
hill: contour lines, vegetation, green area, hiking trail: doted line (means -----)