i just changed the starter yesterday, youl need a 90 degree pivit adapter plus a3/4 inch shallow socket plus 10-14 inches of extension and possibly abreaker bar on ratchet handle. good luck spray w-d40 first Ike
It's all held together under the intake manifold by vacuum. just pull it and clean it out with carb cleaner. IPDUSA.com sells a flametrap relocation kit that take the same time to install as a...
Fuel Sending Unit has to be replaced, located inside the tank, accesed through the floor cover in a trunk, or cargo area (wagons). You will need special IPD tool $24 to do the job. Priming pump will...
First you've got to loosen the tensioner pulley bolt. Loosen both bolts as usual on the alternator and that should give you the slack to take it off. If its already off then to put on a new one.
1.) Open the hood 2.) Look directly behind the headlight housing inside of the engine compartment3.) There should be a black plug plugged into the back of the headlight. The back of the headlight...
Try the pegasus replicas... they look nice on the Volvo 240 IPDPEG177520 Pegasus Replica - Hyper Black Finish Fitment/Application: 17x7.5 inch wheel 5x108 bolt pattern with 20mm offset Direct bolt...